Mass and thickness of magneto-dielectric radar absorbers: fundamental constraints and practical guidelines
Radar absorbing materials (RAM) are limited by their thickness, and magnetic RAM by their mass. We derive a single bound for magneto-dielectric absorbers on a metal plane at normal incidence, based only on causality, passivity and the laws of magnetism. For any crossover frequency Fc, the attenuation below Fc, integrated over frequency, and the attenuation above Fc, integrated over wavelength, are paid together by the thickness and by the amount of magnetic material, which is set by the saturation magnetization and the density of the magnetic constituents. When Fc → 0 and Fc → ∞, the bound reduces to Rozanov’s relation and to the thin magnetic absorber relation of Acher and Adenot; in between, it replaces the unconstrained static permeabilities of Rozanov’s general relation by a magnetic mass. For a flat specification of moderate depth (up to about 15 dB), the minimum thickness and mass approximately follow a universal law that depends only on the bandwidth ratio: the magnetic material pays for the lower part of the band, the thickness for the upper part. For deep specifications the price saturates, which allows “Super Deep” and “Super Broadband” absorbers; only the combination of dielectric and magnetic materials can reach them. Simple stacks that respect causality and the laws of magnetism use up to 79 % of the bound, whereas four commercial or patented magnetic absorbers use 13 to 21 %, which leaves room for new materials and designs. Accompanying software gives, for any reflection curve, the region of the thickness–mass plane allowed to an absorber with this curve.
Authors
- O. Acher (ORCID: https://orcid.org/0000-0001-9001-4104)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-18
- DOI
- https://doi.org/10.5281/zenodo.24345126
- Primary Topic
- Electromagnetic wave absorption materials
- Type
- preprint