Effect of quarry dust as a fine-aggregate replacement on the mechanical performance, microstructure and strength-normalized carbon efficiency of concrete

River-sand depletion and the accumulation of quarrying by-products have increased interest in alternative fine aggregates for sustainable concrete production. This study investigates the influence of granite-derived quarry dust (QD) on the mechanical performance, microstructural characteristics and carbon efficiency of concrete. Six concrete mixtures were prepared by replacing natural river sand with QD at 0, 20, 40, 60, 80 and 100% by mass, maintaining a constant water-to-cement ratio of 0.45. Workability, density, compressive strength and splitting tensile strength were evaluated at curing ages of 3–92 days, complemented by scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM–EDX), statistical analysis and a screening cradle-to-gate life-cycle assessment. Increasing QD content reduced slump by up to 46%, while variations in fresh and hardened densities remained below 0.15% relative to the control. At 28 days, 40% QD replacement produced the highest compressive and splitting tensile strengths, exceeding the control by 12.1% and 7.8%, respectively. Analysis of variance confirmed significant effects of QD content on both mechanical properties ( p < 0.001), although differences between 40% and 60% replacement were not statistically significant. Qualitative SEM–EDX observations were consistent with improved matrix continuity and interfacial characteristics at intermediate replacement levels, whereas higher QD contents were associated with reduced workability and less favourable microstructural features. Cradle-to-gate global warming potential varied by less than 0.5% across the mixtures under both allocation scenarios; however, 40% QD replacement reduced strength-normalized global warming potential by 10.7% and avoided 246.8 kg/m³ of natural river sand. These findings identify 40–60% QD as a favourable replacement range for the investigated materials, with 40% providing the best balance of mechanical performance, workability and strength-normalized carbon efficiency.

Authors

Institutions

Publication Details

Journal
Discover Materials
Published
2026-11-18
DOI
https://doi.org/10.1007/s43939-026-01084-6
Primary Topic
Materials Engineering and Processing
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effect of quarry dust as a fine-aggregate replacement on the mechanical performance, microstructure and strength-normalized carbon efficiency of concrete

Majid Movahedi Rad, Udeme Udo Imoh
1 links
Discover Materials
Materials Engineering and Processing
article

Effect of quarry dust as a fine-aggregate replacement on the mechanical performance, microstructure and strength-normalized carbon efficiency of concrete

Majid Movahedi Rad, Udeme Udo Imoh
article en

Abstract

River-sand depletion and the accumulation of quarrying by-products have increased interest in alternative fine aggregates for sustainable concrete production. This study investigates the influence of granite-derived quarry dust (QD) on the mechanical performance, microstructural characteristics and carbon efficiency of concrete. Six concrete mixtures were prepared by replacing natural river sand with QD at 0, 20, 40, 60, 80 and 100% by mass, maintaining a constant water-to-cement ratio of 0.45. Workability, density, compressive strength and splitting tensile strength were evaluated at curing ages of 3–92 days, complemented by scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM–EDX), statistical analysis and a screening cradle-to-gate life-cycle assessment. Increasing QD content reduced slump by up to 46%, while variations in fresh and hardened densities remained below 0.15% relative to the control. At 28 days, 40% QD replacement produced the highest compressive and splitting tensile strengths, exceeding the control by 12.1% and 7.8%, respectively. Analysis of variance confirmed significant effects of QD content on both mechanical properties ( p < 0.001), although differences between 40% and 60% replacement were not statistically significant. Qualitative SEM–EDX observations were consistent with improved matrix continuity and interfacial characteristics at intermediate replacement levels, whereas higher QD contents were associated with reduced workability and less favourable microstructural features. Cradle-to-gate global warming potential varied by less than 0.5% across the mixtures under both allocation scenarios; however, 40% QD replacement reduced strength-normalized global warming potential by 10.7% and avoided 246.8 kg/m³ of natural river sand. These findings identify 40–60% QD as a favourable replacement range for the investigated materials, with 40% providing the best balance of mechanical performance, workability and strength-normalized carbon efficiency.

Discover Materials
Széchenyi István University (HU)
Responsible consumption and production, Climate action
Materials Engineering and Processing
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon