Unlocking New Opportunities for Platinum in Chlor-Alkali Electrolysis with Ultralow-Pt Carbon Cloth Cathodes

Chlor-alkali electrolysis is one of the most energy-intensive industrial processes, and the development of cathode materials that balance high activity with reduced noble metal utilization remains a critical challenge. This work reports the evaluation of low-platinum on carbon cloth (Pt/CC) cathodes in membrane chlor-alkali electrolysis. The Pt loading levels ranged from 0.025 to 0.2 mg Pt cm–2 and were deposited via air-gun spray and electrospray. XRD analysis confirmed fcc Pt crystallites in both air-gun- and electrospray-deposited electrodes with no oxide phases, demonstrating that the deposition technique does not affect the crystallographic structure of the catalyst. Full-cell linear sweep voltammetry and galvanostatic electrolysis experiments revealed a decrease in specific energy consumption for NaOH production with increasing Pt loading. Balancing performance and platinum utilization, a loading of 0.05 mg Pt cm–2 emerged as optimal, which, at 100 mA cm–2, achieved a specific energy consumption of 2.94 and 2.83 kWh kg–1 NaOH at 25 and 50 °C, respectively. At this optimal loading level, the electrode demonstrated high durability over 80 h of operation at 100 mA cm–2 and 50 °C. The technology was further validated in a four-cell stack comprising 25 cm2 electrodes connected in parallel, yielding enhanced performance and operational stability. These results demonstrate that air-gun-spray-deposited Pt/CC cathodes at 0.05 mg Pt cm–2 loading offer a compelling combination of competitive energy efficiency and minimal noble metal utilization, highlighting the potential for an ultralow-Pt-based cathode platform for next-generation energy-efficient chlor-alkali production.

Authors

Institutions

Publication Details

Journal
Chem & Bio Engineering
Published
2026-11-18
DOI
https://doi.org/10.1021/cbe.6c00194
Primary Topic
Electrocatalysts for Energy Conversion
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Unlocking New Opportunities for Platinum in Chlor-Alkali Electrolysis with Ultralow-Pt Carbon Cloth Cathodes

Alberto Rodríguez-Gómez, Justo Lobato, Miguel Ángel Rodríguez-Cano, Manuel Andrés Rodrigo et al.
Chem & Bio Engineering
Electrocatalysts for Energy Conversion
article

Unlocking New Opportunities for Platinum in Chlor-Alkali Electrolysis with Ultralow-Pt Carbon Cloth Cathodes

Alberto Rodríguez-Gómez, Justo Lobato, Miguel Ángel Rodríguez-Cano, Manuel Andrés Rodrigo, Prince Sungdewie Adama Nopuo
article en

Abstract

Chlor-alkali electrolysis is one of the most energy-intensive industrial processes, and the development of cathode materials that balance high activity with reduced noble metal utilization remains a critical challenge. This work reports the evaluation of low-platinum on carbon cloth (Pt/CC) cathodes in membrane chlor-alkali electrolysis. The Pt loading levels ranged from 0.025 to 0.2 mg Pt cm–2 and were deposited via air-gun spray and electrospray. XRD analysis confirmed fcc Pt crystallites in both air-gun- and electrospray-deposited electrodes with no oxide phases, demonstrating that the deposition technique does not affect the crystallographic structure of the catalyst. Full-cell linear sweep voltammetry and galvanostatic electrolysis experiments revealed a decrease in specific energy consumption for NaOH production with increasing Pt loading. Balancing performance and platinum utilization, a loading of 0.05 mg Pt cm–2 emerged as optimal, which, at 100 mA cm–2, achieved a specific energy consumption of 2.94 and 2.83 kWh kg–1 NaOH at 25 and 50 °C, respectively. At this optimal loading level, the electrode demonstrated high durability over 80 h of operation at 100 mA cm–2 and 50 °C. The technology was further validated in a four-cell stack comprising 25 cm2 electrodes connected in parallel, yielding enhanced performance and operational stability. These results demonstrate that air-gun-spray-deposited Pt/CC cathodes at 0.05 mg Pt cm–2 loading offer a compelling combination of competitive energy efficiency and minimal noble metal utilization, highlighting the potential for an ultralow-Pt-based cathode platform for next-generation energy-efficient chlor-alkali production.

Chem & Bio Engineering
University of Castilla-La Mancha (ES)
Ministerio de Ciencia, Innovación y Universidades, European Commission, HORIZON EUROPE Framework Programme, Agencia Estatal de Investigación, European Social Fund, HORIZON EUROPE Digital, Industry and Space
Affordable and clean energy, Responsible consumption and production
Electrocatalysts for Energy Conversion
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon