APPLICATION OF PROCESS CONTROL TECHNIQUES IN PRODUCTION PROCESS QUALITY CONTROL OF CEMENT MANUFACTURING

Quality control is a critical factor in sustaining competitiveness in cement manufacturing, where product uniformity directly impacts market acceptance. This study applied Statistical Process Control (SPC) techniques to the production process of Lafarge Cement Manufacturing Ltd, Gboko, Benue State. Primary raw mix data were obtained from the company’s Data Control Department and statistically analyzed using Microsoft Excel. The mean values of raw mixes were 18.15, 17.91, and 18.06 for Feeders 1, 2, and 3 respectively, with corresponding standard deviations of 0.71, 0.71, and 0.69. Control limit evaluation showed that Feeder 1 had Centre Line (CL), Upper Control Limit (UCL), and Lower Control Limit (LCL) of 18.15, 19.10, and 17.20, respectively, while Feeder 2 had 17.91, 18.86, and 16.96, and Feeder 3 had 18.06, 18.99, and 17.13. X-bar charts indicated that most process variations were within control, though specific days showed out-of-control points due to assignable causes. Analysis of clinker quality indices revealed Lime Saturation Factor (LSF) values of 110.49%, 113.00%, and 116.24% for F1, F2, and F3, respectively, with Silica Moduli (SM) of 3.46, 3.57, and 3.47, and Alumina Moduli (AM) of 1.03, 0.99, and 0.96. These results suggest that Feeder 1 demonstrated greater process stability, while Feeder 3 produced clinker with higher strength potential due to elevated LSF, and Feeder 2 showed higher SM values linked to delayed clinker burnability. Overall, the study confirms SPC as an effective diagnostic and monitoring tool for improving cement production quality, and recommends its integration into routine quality management systems to enhance efficiency, product reliability, and Nigeria’s global cement competitiveness

Authors

Institutions

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-18
DOI
https://doi.org/10.5281/zenodo.24337732
Primary Topic
Advanced Statistical Process Monitoring
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

APPLICATION OF PROCESS CONTROL TECHNIQUES IN PRODUCTION PROCESS QUALITY CONTROL OF CEMENT MANUFACTURING

Nwosu J. O., Ikechukwu F. I., Nwadinobi P. C., Nwogu C. N. et al.
3 links
Zenodo (CERN European Organization for Nuclear Research)
Advanced Statistical Process Monitoring
article

APPLICATION OF PROCESS CONTROL TECHNIQUES IN PRODUCTION PROCESS QUALITY CONTROL OF CEMENT MANUFACTURING

Nwosu J. O., Ikechukwu F. I., Nwadinobi P. C., Nwogu C. N., Aboje V. A.
article en

Abstract

Quality control is a critical factor in sustaining competitiveness in cement manufacturing, where product uniformity directly impacts market acceptance. This study applied Statistical Process Control (SPC) techniques to the production process of Lafarge Cement Manufacturing Ltd, Gboko, Benue State. Primary raw mix data were obtained from the company’s Data Control Department and statistically analyzed using Microsoft Excel. The mean values of raw mixes were 18.15, 17.91, and 18.06 for Feeders 1, 2, and 3 respectively, with corresponding standard deviations of 0.71, 0.71, and 0.69. Control limit evaluation showed that Feeder 1 had Centre Line (CL), Upper Control Limit (UCL), and Lower Control Limit (LCL) of 18.15, 19.10, and 17.20, respectively, while Feeder 2 had 17.91, 18.86, and 16.96, and Feeder 3 had 18.06, 18.99, and 17.13. X-bar charts indicated that most process variations were within control, though specific days showed out-of-control points due to assignable causes. Analysis of clinker quality indices revealed Lime Saturation Factor (LSF) values of 110.49%, 113.00%, and 116.24% for F1, F2, and F3, respectively, with Silica Moduli (SM) of 3.46, 3.57, and 3.47, and Alumina Moduli (AM) of 1.03, 0.99, and 0.96. These results suggest that Feeder 1 demonstrated greater process stability, while Feeder 3 produced clinker with higher strength potential due to elevated LSF, and Feeder 2 showed higher SM values linked to delayed clinker burnability. Overall, the study confirms SPC as an effective diagnostic and monitoring tool for improving cement production quality, and recommends its integration into routine quality management systems to enhance efficiency, product reliability, and Nigeria’s global cement competitiveness

Zenodo (CERN European Organization for Nuclear Research)
Abia State University (NG), Gregory University Uturu (NG), Michael Okpara University of Agriculture (NG)
Industry, innovation and infrastructure
Advanced Statistical Process Monitoring
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon