Effects of Surface Finishing Protocols and Simulated Toothbrushing on Three-Dimensional Surface Topography and Wettability of Feldspathic CAD/CAM Ceramics

Surface finishing governs the surface integrity of feldspathic CAD/CAM ceramics; however, the stability of finished surfaces under toothbrushing remains unclear. This in vitro study evaluated the effects of four finishing protocols (OptraFine polishing, EVE polishing, glazing, and OptraFine polishing followed by glazing) and simulated toothbrushing on the three-dimensional surface topography and wettability of this ceramic. Forty-eight disc-shaped specimens (n = 12) were analyzed before and after 20,000 brushing cycles (approximately 2 years of clinical use) using the ISO 25178 areal parameters Sa, Sz, Ssk, Sku, and Sdr and the static water contact angle, complemented by scanning electron microscopy and energy-dispersive X-ray spectroscopy (EDS). Data were analyzed using generalized estimating equations. The finishing protocol significantly affected all evaluated parameters. Toothbrushing increased Sz, Sku, and Sdr overall and significantly decreased the contact angle in all groups except the Glaze group, whereas its effect on Sa was protocol-dependent, with significant increases only in the OptraFine and OptraFine + Glaze groups. OptraFine produced the lowest Sa and remained smoother than both glazed groups after brushing. EDS suggested a compositional shift in the glazed surfaces toward that of the ceramic substrate. The complete three-step OptraFine sequence may serve as an alternative to reglazing in terms of surface roughness, whereas polishing before glazing did not reduce Sa.

Authors

Institutions

Publication Details

Journal
Coatings
Published
2026-11-18
DOI
https://doi.org/10.3390/coatings16111373
Primary Topic
Dental materials and restorations
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effects of Surface Finishing Protocols and Simulated Toothbrushing on Three-Dimensional Surface Topography and Wettability of Feldspathic CAD/CAM Ceramics

Zeynep Yeşil, Firas Süleymanoğlu, Zahide Aydın
2 links
Coatings
Dental materials and restorations
article

Effects of Surface Finishing Protocols and Simulated Toothbrushing on Three-Dimensional Surface Topography and Wettability of Feldspathic CAD/CAM Ceramics

Zeynep Yeşil, Firas Süleymanoğlu, Zahide Aydın
article en

Abstract

Surface finishing governs the surface integrity of feldspathic CAD/CAM ceramics; however, the stability of finished surfaces under toothbrushing remains unclear. This in vitro study evaluated the effects of four finishing protocols (OptraFine polishing, EVE polishing, glazing, and OptraFine polishing followed by glazing) and simulated toothbrushing on the three-dimensional surface topography and wettability of this ceramic. Forty-eight disc-shaped specimens (n = 12) were analyzed before and after 20,000 brushing cycles (approximately 2 years of clinical use) using the ISO 25178 areal parameters Sa, Sz, Ssk, Sku, and Sdr and the static water contact angle, complemented by scanning electron microscopy and energy-dispersive X-ray spectroscopy (EDS). Data were analyzed using generalized estimating equations. The finishing protocol significantly affected all evaluated parameters. Toothbrushing increased Sz, Sku, and Sdr overall and significantly decreased the contact angle in all groups except the Glaze group, whereas its effect on Sa was protocol-dependent, with significant increases only in the OptraFine and OptraFine + Glaze groups. OptraFine produced the lowest Sa and remained smoother than both glazed groups after brushing. EDS suggested a compositional shift in the glazed surfaces toward that of the ceramic substrate. The complete three-step OptraFine sequence may serve as an alternative to reglazing in terms of surface roughness, whereas polishing before glazing did not reduce Sa.

CoatingsVol. 16(11)
Ministry of Health (TR), Erzincan Binali Yıldırım University (TR), Erzurum Technical University (TR), Erzurum Regional Training and Research Hospital (TR), Sağlık Bilimleri Üniversitesi (TR), Atatürk University (TR), University of Health Sciences Antigua (AG)
Dental materials and restorations
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon