Direct-to-metal anticorrosive coatings based on emulsion copolymers embedded with Cu nanoparticles
Improving the corrosion resistance of direct-to-metal (DTM) coatings is essential for extending the service life of metallic structures exposed to aggressive environments. In this study, an emulsion copolymer coating incorporated with copper nanoparticles (CuNPs) was developed to enhance the anticorrosion performance of steel substrates. Spherical shaped CuNPs were firstly synthesized by L-ascorbic-acid-mediated synthesis, with particle size of 52.1 nm. Subsequently, CuNPs were uniformly dispersed within the styrene-acrylic emulsion and coated the metal surface. Compared to the blank sample, using of CuNPs formulation passed the salt spraying test with minimal defects. The corrosion inhibition efficiency (CIE) of the coated metal in different medium was significantly enhanced after CuNPs incorporation. The estimated CIE was 94.5%, 92.1% and 80.5% in case of immersing for ten days in water, fuel and H₂SO₄, respectively. The improved performance was attributed to the homogeneous distribution of CuNPs within the polymer matrix, which reduced coating porosity and blocked micro-defects, in addition to formation of a stable protective layer at the metal-coating interface. Hence, the developed CuNP-reinforced DTM coating exhibited superior barrier properties, enhanced corrosion protection, and good structural stability, highlighting its potential as an effective protective coating system for metal surfaces in corrosive environments.
Authors
- Hossam E. Emam (ORCID: https://orcid.org/0000-0002-5512-935X)
- Maher H. Helal
- Mina F. F. Abdelmalek
Institutions
- Chulalongkorn University (TH)
- National Research Centre (EG)
- Helwan University (EG)
Publication Details
- Journal
- Discover Nano
- Published
- 2026-11-18
- DOI
- https://doi.org/10.1186/s11671-026-04893-z
- Primary Topic
- Corrosion Behavior and Inhibition
- Type
- article
- Field-Weighted Citation Impact
- 0.00