Temperature Effect on Bonding Quality of Polyether‐Ether‐Ketone Composites During Injection Over‐Molding

This study investigates the effect of temperature during the injection over‐molding (IOM) process on the interfacial bonding quality of prefabricated composite components (hot‐pressed inserts) and short fiber reinforced polyether–ether–ketone (PEEK) injection molding produced composites. The moldflow analysis software is employed to simulate the IOM process interface temperature field, followed by experimental verification of the interface bonding strength through single‐lap shear tests. The main findings indicate that optimizing the injection and mold temperatures can increase the joint strength by more than two and five times, respectively. The injection temperature of 410°C promotes resin intermingling, thereby improving the bond quality, while a mold temperature of around 200°C decreases the rate of cooling, thereby extending the resin intermingling and crystallization window, which in turn improves the joint strength. This paper substantiates the feasibility of the IOM process for PEEK composites and offers new insights into joint assembly methods within the composites industry.

Authors

Institutions

Publication Details

Journal
Polymer Composites
Published
2026-11-18
DOI
https://doi.org/10.1002/pc.71837
Primary Topic
Injection Molding Process and Properties
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Temperature Effect on Bonding Quality of Polyether‐Ether‐Ketone Composites During Injection Over‐Molding

Jie Hao, Zijie Wu, Haiming Liu, Yufan Yang et al.
3 links
Polymer Composites
Injection Molding Process and Properties
article

Temperature Effect on Bonding Quality of Polyether‐Ether‐Ketone Composites During Injection Over‐Molding

Jie Hao, Zijie Wu, Haiming Liu, Yufan Yang, Nan Hu
article en

Abstract

This study investigates the effect of temperature during the injection over‐molding (IOM) process on the interfacial bonding quality of prefabricated composite components (hot‐pressed inserts) and short fiber reinforced polyether–ether–ketone (PEEK) injection molding produced composites. The moldflow analysis software is employed to simulate the IOM process interface temperature field, followed by experimental verification of the interface bonding strength through single‐lap shear tests. The main findings indicate that optimizing the injection and mold temperatures can increase the joint strength by more than two and five times, respectively. The injection temperature of 410°C promotes resin intermingling, thereby improving the bond quality, while a mold temperature of around 200°C decreases the rate of cooling, thereby extending the resin intermingling and crystallization window, which in turn improves the joint strength. This paper substantiates the feasibility of the IOM process for PEEK composites and offers new insights into joint assembly methods within the composites industry.

Polymer Composites
Zhengzhou University (CN)
National Natural Science Foundation of China
Injection Molding Process and Properties
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon