Study on transport and escape characteristics of particles in a combustion-heat-driven gas flow in fracture channels

To reveal the dust generation characteristics of different-sized coal particles and the dust transport and escape behavior within fracture channels during coal combustion, the heat released at the coal fracture channel wall was incorporated into the gas-phase momentum equation via the equation of state and the continuity equation. The simultaneous solution of these governing equations produced an analytical formulation for the pressure gradient within the fracture channel under combustion-induced heating. This pressure gradient served as the driving force for gas flow, and the particle motion equations—accounting for drag, gravity, pressure-gradient forces, and thermophoresis—were solved using the discrete phase model (DPM) to simulate the transport and escape behavior of particles across different size ranges. Experimentally, coal particles of four distinct sizes (2 cm, 1 cm, 0.5 cm, and 0.1 cm) were combusted, and the dispersity of the resulting dust was quantified using a dust dispersity analyzer. The findings indicate that the ability of particles to escape is inversely proportional to the square of their size, with smaller particles preferentially escaping alongside the gas flow, while larger particles exhibit reduced escape propensity. Dust generated from coal particles of all sizes predominantly consists of fine particles; notably, larger coal particles yield a finer dust generation spectrum, whereas smaller coal particles produce a coarser yet more uniform distribution. The observed skewness of the measured spectra toward finer particles supports the preferential transport of fine particles, resulting in an escaping dust population that is further enriched in fine particles relative to the initial generation spectrum. These results offer a foundational framework for assessing dust exposure and informing dust suppression strategies in combustion settings involving coal particles of diverse sizes.

Authors

Institutions

Publication Details

Journal
Scientific Reports
Published
2026-11-18
DOI
https://doi.org/10.1038/s41598-026-80583-1
Primary Topic
Combustion and Detonation Processes
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Study on transport and escape characteristics of particles in a combustion-heat-driven gas flow in fracture channels

Yiju Tang, Fangchao Lu, Kaihong Wang, Sheng Liu et al.
Scientific Reports
Combustion and Detonation Processes
article

Study on transport and escape characteristics of particles in a combustion-heat-driven gas flow in fracture channels

Yiju Tang, Fangchao Lu, Kaihong Wang, Sheng Liu, Lulu Zhang, Piaopiao Liu
article en

Abstract

To reveal the dust generation characteristics of different-sized coal particles and the dust transport and escape behavior within fracture channels during coal combustion, the heat released at the coal fracture channel wall was incorporated into the gas-phase momentum equation via the equation of state and the continuity equation. The simultaneous solution of these governing equations produced an analytical formulation for the pressure gradient within the fracture channel under combustion-induced heating. This pressure gradient served as the driving force for gas flow, and the particle motion equations—accounting for drag, gravity, pressure-gradient forces, and thermophoresis—were solved using the discrete phase model (DPM) to simulate the transport and escape behavior of particles across different size ranges. Experimentally, coal particles of four distinct sizes (2 cm, 1 cm, 0.5 cm, and 0.1 cm) were combusted, and the dispersity of the resulting dust was quantified using a dust dispersity analyzer. The findings indicate that the ability of particles to escape is inversely proportional to the square of their size, with smaller particles preferentially escaping alongside the gas flow, while larger particles exhibit reduced escape propensity. Dust generated from coal particles of all sizes predominantly consists of fine particles; notably, larger coal particles yield a finer dust generation spectrum, whereas smaller coal particles produce a coarser yet more uniform distribution. The observed skewness of the measured spectra toward finer particles supports the preferential transport of fine particles, resulting in an escaping dust population that is further enriched in fine particles relative to the initial generation spectrum. These results offer a foundational framework for assessing dust exposure and informing dust suppression strategies in combustion settings involving coal particles of diverse sizes.

Scientific Reports
Henan University of Urban Construction (CN)
Natural Science Foundation of Henan Province
Combustion and Detonation Processes
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon