Temperature-processing time-dependent formation of strontium phosphate conversion coatings on mild steel: interfacial control of corrosion protection

A strontium phosphate conversion coating was developed on mild steel and its formation mechanism and corrosion behaviour were investigated as a function of bath temperature and processing time. The formation of a compact Sr-P coating on mild steel requires highly acidic conditions (pH = 2.2) and elevated precursor concentration, enabling the development of a α/γ-SrHPO 4 -based conversion coating. Comprehensive structural, elemental, and electrochemical characterization (SEM/EDS, XRD, FTIR, XPS, SIMS, TEM and PD, EIS and accelerated corrosion test in NSS chamber with cataphoretic electro-coating topcoat) revealed that corrosion protection is governed by a hierarchically structured multilayer system consisting of an outer crystalline α/γ-SrHPO 4 -based layer and compact amorphous interfacial phosphate layer. EIS analysis demonstrated that the interfacial layer plays a dominant role in corrosion resistance by acting as primary barrier against charge-transfer processes. The highest corrosion protection was achieved at 75 °C and 20 min, corresponding to balanced nucleation-growth regime leading to a continuous interfacial layer and an outer structure with minimized density of defects. A deviation from these conditions results in either insufficient coating formation or defect generation. The results show that barrier corrosion protection is primarily governed by the integrity of the interfacial layer (whose short-range structure may exhibit similarities to phosphate-based bioactive glasses) rather than the coating thickness or crystallinity, in contrast to conventional zinc phosphating, where corrosion protection is predominantly governed by the crystalline phosphate layer development.

Authors

Institutions

Publication Details

Journal
Applied Surface Science Advances
Published
2026-11-19
DOI
https://doi.org/10.1016/j.apsadv.2026.101105
Primary Topic
Corrosion Behavior and Inhibition
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Temperature-processing time-dependent formation of strontium phosphate conversion coatings on mild steel: interfacial control of corrosion protection

Karel Mašek, Marek Vronka, Viktor Johánek, Jaroslav Fojt et al.
1 links
Applied Surface Science Advances
Corrosion Behavior and Inhibition
article

Temperature-processing time-dependent formation of strontium phosphate conversion coatings on mild steel: interfacial control of corrosion protection

Karel Mašek, Marek Vronka, Viktor Johánek, Jaroslav Fojt, Nikola Prodanovic, Petr Pokorný, Dalibor Všianský, Adam Zabloudil
article en

Abstract

A strontium phosphate conversion coating was developed on mild steel and its formation mechanism and corrosion behaviour were investigated as a function of bath temperature and processing time. The formation of a compact Sr-P coating on mild steel requires highly acidic conditions (pH = 2.2) and elevated precursor concentration, enabling the development of a α/γ-SrHPO 4 -based conversion coating. Comprehensive structural, elemental, and electrochemical characterization (SEM/EDS, XRD, FTIR, XPS, SIMS, TEM and PD, EIS and accelerated corrosion test in NSS chamber with cataphoretic electro-coating topcoat) revealed that corrosion protection is governed by a hierarchically structured multilayer system consisting of an outer crystalline α/γ-SrHPO 4 -based layer and compact amorphous interfacial phosphate layer. EIS analysis demonstrated that the interfacial layer plays a dominant role in corrosion resistance by acting as primary barrier against charge-transfer processes. The highest corrosion protection was achieved at 75 °C and 20 min, corresponding to balanced nucleation-growth regime leading to a continuous interfacial layer and an outer structure with minimized density of defects. A deviation from these conditions results in either insufficient coating formation or defect generation. The results show that barrier corrosion protection is primarily governed by the integrity of the interfacial layer (whose short-range structure may exhibit similarities to phosphate-based bioactive glasses) rather than the coating thickness or crystallinity, in contrast to conventional zinc phosphating, where corrosion protection is predominantly governed by the crystalline phosphate layer development.

Applied Surface Science AdvancesVol. 36
Czech Academy of Sciences (CZ), Charles University (CZ), Masaryk University (CZ), FZU ‒ Institute of Physics of the Academy of Sciences of the Czech Republic (CZ), Czech Technical University in Prague (CZ), University of Chemistry and Technology, Prague (CZ)
Ministerstvo Školství, Mládeže a Tělovýchovy, Grantová Agentura České Republiky
Corrosion Behavior and Inhibition
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon