Formowanie membran kompozytowych na bazie alginianu z dodatkiem tlenku grafenu
Three methods for prepg. layered composite membranes consisting of an alginate (ALG)-based sepn. layer with 0.5, 1.5, and 3% graphene oxide (GO) addn., supported on a polyester (PET) nonwoven layer, were presented. The membranes were formed using the phase inversion method via coagulation in an aq. CaCl soln. Following coagula2 tion, one series of membranes was stored in distilled water, another in MeOH, and the third was dried. The studies demonstrated the feasibility of producing composite membranes featuring a thin (approx. 3 µm) GO/ALG sepn. layer. Hydrophilic GO/ALG/PET membranes exhibited high flux values, reaching approx. 80 dm³/(m²·h) at an operating pressure of 0.3 MPa (for the membrane contg. 1.5% GO added to the alginate).
Authors
- Emilia Leksa
Publication Details
- Journal
- PRZEMYSŁ CHEMICZNY
- Published
- 2026-11-18
- DOI
- https://doi.org/10.15199/62.2026.11.2
- Primary Topic
- Membrane Separation Technologies
- Type
- article
- Field-Weighted Citation Impact
- 0.00