Wire-Embedded Additive Manufactured Self-Sensing Robotic Gripper Jaw

In this contribution, we present a wire-embedded additive manufactured self-sensing robotic gripper jaw for coupled force sensing and structural reinforcement in polymer-based structures. The gripper jaw operates within a gripping force range of 0 to 40 N and is fabricated using fused filament fabrication, with constantan wires embedded via an industrial robot. The gripper jaw’s design is based on a multiple-bending-beam structure, similar to a single-point load cell, with four meandering wire segments integrated into each beam. This study explores the sensor design of the gripper jaw, including analytical and simulation modeling, the fabrication process, and the sensor behavior. Comparisons are made with other partially and fully 3D-printed sensitive gripper jaws and force sensors, as well as an aluminum reference sensor. The results demonstrate that the wire-embedded additive manufactured gripper jaw with constantan wires as sensor elements achieves measurement characteristics suitable for the requirements of precise handling of sensitive and fragile components, with a maximum nonlinearity of −0.29% and a creep deviation of 0.91%, both relative to full scale.

Authors

Institutions

Publication Details

Journal
Sensors
Published
2026-11-17
DOI
https://doi.org/10.3390/s26227268
Primary Topic
Additive Manufacturing and 3D Printing Technologies
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Wire-Embedded Additive Manufactured Self-Sensing Robotic Gripper Jaw

Thomas M. Wendt, Stefan J. Rupitsch, Nikolai Hangst
Sensors
Additive Manufacturing and 3D Printing Technologies
article

Wire-Embedded Additive Manufactured Self-Sensing Robotic Gripper Jaw

Thomas M. Wendt, Stefan J. Rupitsch, Nikolai Hangst
article en

Abstract

In this contribution, we present a wire-embedded additive manufactured self-sensing robotic gripper jaw for coupled force sensing and structural reinforcement in polymer-based structures. The gripper jaw operates within a gripping force range of 0 to 40 N and is fabricated using fused filament fabrication, with constantan wires embedded via an industrial robot. The gripper jaw’s design is based on a multiple-bending-beam structure, similar to a single-point load cell, with four meandering wire segments integrated into each beam. This study explores the sensor design of the gripper jaw, including analytical and simulation modeling, the fabrication process, and the sensor behavior. Comparisons are made with other partially and fully 3D-printed sensitive gripper jaws and force sensors, as well as an aluminum reference sensor. The results demonstrate that the wire-embedded additive manufactured gripper jaw with constantan wires as sensor elements achieves measurement characteristics suitable for the requirements of precise handling of sensitive and fragile components, with a maximum nonlinearity of −0.29% and a creep deviation of 0.91%, both relative to full scale.

SensorsVol. 26(22)
University of Freiburg (DE), Offenburg University of Applied Sciences (DE)
Additive Manufacturing and 3D Printing Technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon