Assessment of Mine Ground Deformation and Stability Using Extensometer and Field Strain Gauge Measurements
This laboratory report presents a comprehensive geotechnical assessment of mine opening convergence and rock-mass stability utilizing an integrated monitoring approach consisting of mechanical extensometers and resistance-based field strain gauges over a 30-day observation period. Investigating the structural response of underground excavations subjected to stress redistribution, the study evaluates inward boundary deformation, convergence rates, and localized microstrain development. The publication details the operational principles and installation workflows of both instrumentation systems—including invar steel tape extensometers for tracking roof-to-floor and sidewall-to-sidewall displacement, and polyimide-backed resistance strain gauges for measuring surface deformation. Through empirical data analysis, the report documents a total convergence of 6.98 mm (with extensometer readings decreasing from an initial 2500.00 mm to 2493.02 mm) and a cumulative strain increase reaching 3295 με. Furthermore, convergence rate analysis reveals a progressive deceleration from 0.456 mm/day down to 0.096 mm/day, providing quantitative evidence of a stabilizing ground condition while emphasizing the necessity of continuous monitoring for underground safety.
Authors
- Prithik Roy Propel
Publication Details
- Journal
- Figshare
- Published
- 2026-11-18
- DOI
- https://doi.org/10.6084/m9.figshare.35050660
- Primary Topic
- Geomechanics and Mining Engineering
- Type
- article
- Field-Weighted Citation Impact
- 0.00