Environmental Trade-Offs and Emission Reduction Potential of Steel Slag-Based Geopolymer Foundry Moulds

Conventional foundry moulding systems rely on silica sand combined with organic binders or ordinary Portland cement (OPC), generating environmental burdens associated with raw material consumption, hazardous casting emissions and carbon-intensive binder production. This study assesses the environmental potential of black steelmaking slag (BS) as a secondary resource for geopolymer-based foundry moulds, through its use as an alkali-activated binder precursor and an alternative moulding aggregate. The assessment combines controlled casting emission measurements, leaching tests and a comparative cradle-to-gate life cycle assessment (LCA). Casting trials using silica sand as the common aggregate showed substantially lower measured BTEX concentrations for the geopolymer binder than for the furan resin reference, together with lower CO and NOx concentrations than both conventional binder systems. Cr concentrations in the geopolymer leachate were below the analytical reporting limit of 0.5 ppm, compared with 3.66 ppm for raw BS, consistent with restricted Cr release under the investigated conditions. Expressed per 1 m3 of moulding material, LCA indicated GWP reductions of 33.49% and 35.27% for geopolymer Scenarios S and E, respectively, relative to the OPC baseline. These climate benefits were accompanied by higher impacts in the other 10 assessed categories. Contribution analysis identified sodium silicate production and slag processing electricity as priorities for environmental improvement. The findings highlight BS-based geopolymer moulds as promising alternatives for reducing production-stage carbon impacts and selected casting emissions while valorising an industrial by-product. Optimising activator supply and processing requirements offers a targeted pathway to improve their broader environmental performance while addressing the trade-offs identified by the LCA.

Authors

Institutions

Publication Details

Journal
Sustainability
Published
2026-11-18
DOI
https://doi.org/10.3390/su182211759
Primary Topic
Materials Engineering and Processing
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Environmental Trade-Offs and Emission Reduction Potential of Steel Slag-Based Geopolymer Foundry Moulds

Lucía Unamunzaga, I. Zamanillo, Rocío Pena, Miguel A. Otero et al.
Sustainability
Materials Engineering and Processing
article

Environmental Trade-Offs and Emission Reduction Potential of Steel Slag-Based Geopolymer Foundry Moulds

Lucía Unamunzaga, I. Zamanillo, Rocío Pena, Miguel A. Otero, Lorena Freire, Claudia Pérez, Isabel Claro, Carolina Ramos
article en

Abstract

Conventional foundry moulding systems rely on silica sand combined with organic binders or ordinary Portland cement (OPC), generating environmental burdens associated with raw material consumption, hazardous casting emissions and carbon-intensive binder production. This study assesses the environmental potential of black steelmaking slag (BS) as a secondary resource for geopolymer-based foundry moulds, through its use as an alkali-activated binder precursor and an alternative moulding aggregate. The assessment combines controlled casting emission measurements, leaching tests and a comparative cradle-to-gate life cycle assessment (LCA). Casting trials using silica sand as the common aggregate showed substantially lower measured BTEX concentrations for the geopolymer binder than for the furan resin reference, together with lower CO and NOx concentrations than both conventional binder systems. Cr concentrations in the geopolymer leachate were below the analytical reporting limit of 0.5 ppm, compared with 3.66 ppm for raw BS, consistent with restricted Cr release under the investigated conditions. Expressed per 1 m3 of moulding material, LCA indicated GWP reductions of 33.49% and 35.27% for geopolymer Scenarios S and E, respectively, relative to the OPC baseline. These climate benefits were accompanied by higher impacts in the other 10 assessed categories. Contribution analysis identified sodium silicate production and slag processing electricity as priorities for environmental improvement. The findings highlight BS-based geopolymer moulds as promising alternatives for reducing production-stage carbon impacts and selected casting emissions while valorising an industrial by-product. Optimising activator supply and processing requirements offers a targeted pathway to improve their broader environmental performance while addressing the trade-offs identified by the LCA.

SustainabilityVol. 18(22)
AZTERLAN (ES), Asociación de Investigación Metalúrgica del Noroeste (ES)
European Commission, Agencia Estatal de Investigación, NextGenerationEU
Responsible consumption and production, Climate action, Industry, innovation and infrastructure
Materials Engineering and Processing
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon