Nanographite Effect on Mechanical Properties of Polylactic Acid Filament Produced by Extrusion Process

Polylactic acid (PLA) is a polymer widely applied for 3D printing. However, PLA is brittle, necessitating reinforcement through the addition of nanomaterials. This study investigates the influence of nanographite on the mechanical properties of extruded PLA filaments. An exploratory and experimental research methodology was employed. The methods include the mixing of the PLA and nanographite at concentrations of 0.5%, 1.0%, and 1.5% using a solution-based technique involving chloroform and magnetic stirring. The resulting dried PLA-nanographite mixture was cut into pellet-like shapes before being extruded into filaments using a single screw filament at 175 ⁰C. The extruded filaments underwent mechanical testing (tensile tests), and fracture morphology was observed under Scanning Electron Microscopy (SEM). Results indicate that analysis of the fracture surface morphology revealed a reduction in ductile fracture characteristics in the PLA following the addition of nanographite, indicating increased material stiffness. Adding nanographite improved the mechanical properties of the PLA, with a maximum tensile strength of 49.79 MPa and an elastic modulus of 1046.3 MPa. The addition of nanographite effectively improves the mechanical properties of PLA filaments, as shown by increases in tensile strength and elastic modulus and a shift toward a more rigid fracture structure. The filaments exhibit ductile fracture characteristics in the control PLA, as well as a transition toward brittle fracture.

Authors

Institutions

Publication Details

Journal
Journal of Mechanical Engineering Science and Technology (JMEST)
Published
2026-11-18
DOI
https://doi.org/10.17977/2580-2402.1298
Primary Topic
Additive Manufacturing and 3D Printing Technologies
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Nanographite Effect on Mechanical Properties of Polylactic Acid Filament Produced by Extrusion Process

Mohammed Ali Alnasser, Faisal A Al Nasser, Rasmitha Suresh
3 links
Journal of Mechanical Engineering Science and Technology (JMEST)
Additive Manufacturing and 3D Printing Technologies
article

Nanographite Effect on Mechanical Properties of Polylactic Acid Filament Produced by Extrusion Process

Mohammed Ali Alnasser, Faisal A Al Nasser, Rasmitha Suresh
article en

Abstract

Polylactic acid (PLA) is a polymer widely applied for 3D printing. However, PLA is brittle, necessitating reinforcement through the addition of nanomaterials. This study investigates the influence of nanographite on the mechanical properties of extruded PLA filaments. An exploratory and experimental research methodology was employed. The methods include the mixing of the PLA and nanographite at concentrations of 0.5%, 1.0%, and 1.5% using a solution-based technique involving chloroform and magnetic stirring. The resulting dried PLA-nanographite mixture was cut into pellet-like shapes before being extruded into filaments using a single screw filament at 175 ⁰C. The extruded filaments underwent mechanical testing (tensile tests), and fracture morphology was observed under Scanning Electron Microscopy (SEM). Results indicate that analysis of the fracture surface morphology revealed a reduction in ductile fracture characteristics in the PLA following the addition of nanographite, indicating increased material stiffness. Adding nanographite improved the mechanical properties of the PLA, with a maximum tensile strength of 49.79 MPa and an elastic modulus of 1046.3 MPa. The addition of nanographite effectively improves the mechanical properties of PLA filaments, as shown by increases in tensile strength and elastic modulus and a shift toward a more rigid fracture structure. The filaments exhibit ductile fracture characteristics in the control PLA, as well as a transition toward brittle fracture.

Journal of Mechanical Engineering Science and Technology (JMEST)Vol. 10(2)
The University of Melbourne (AU), Lincoln University College (MY), Sri Ramakrishna Engineering College (IN)
Additive Manufacturing and 3D Printing Technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon