Spontaneous Water Droplet Transportation on Anodic Porous Alumina with Hierarchical Structures
Hierarchical structures consisting of micro- and nanostructures were formed on the surface of anodic porous alumina by photolithography and selective dissolution of the alumina layer through openings in a resist mask. Samples with micropillar arrays exhibited lower sliding angles and reduced water droplet adhesion than anodic porous alumina without microstructures. The static contact angle also depended on the gap spacing between the micropillars. Based on these results, surfaces with wettability gradients were fabricated by forming micropillar arrays with continuously varying gap spacings. When a water droplet was placed on these surfaces, it spontaneously moved from the less wettable to the more wettable region, reaching a maximum distance of 4.6 mm. This spontaneous movement is attributed to reduced droplet adhesion caused by the hierarchical structures, which decrease resistance to droplet movement.
Authors
- Atsunori Ikezawa (ORCID: https://orcid.org/0000-0002-8857-7159)
- Takashi Yanagishita (ORCID: https://orcid.org/0000-0002-6079-9294)
- Misaki Uchimura
Institutions
- Tokyo Metropolitan University (JP)
Publication Details
- Journal
- Langmuir
- Published
- 2026-11-18
- DOI
- https://doi.org/10.1021/acs.langmuir.6c06616
- Primary Topic
- Surface Modification and Superhydrophobicity
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Light Metals Educational Foundation
- Japan Society for the Promotion of Science