Photothermal Enhanced Droplet-Based Electricity Generator for Water Energy Harvesting at Subzero Temperature
Droplet-based electricity generators (DEGs) can harness widely distributed water-droplet kinetic energy to generate electricity, but their applications in cold environments are severely limited by surface icing/frosting and residual droplets, which disrupt solid-liquid interfacial charge transfer and deteriorate electrical output. Here, we propose a photothermal-enhanced droplet-based electricity generator (PE-DEG) featuring a bifunctional dielectric layer consisting of the graphene-doped polydimethylsiloxane (PDMS) and fluorinated ethylene propylene (FEP). The bifunctional dielectric layer, benefiting from the high dielectric permittivity and photothermal performance of the graphene doping, endows both improved charge-storage capability and efficient solar-to-thermal conversion for surface temperature regulation. Consequently, the PE-DEG achieves an output voltage of 296 V at room temperature and maintains 188 V at -7 °C under 1 sun illumination. Under subzero operation, the output energy of the PE-DEG decreases by only 27.58%, markedly smaller than the 43.14% decrease observed for the conventional DEG. As a proof of concept, the PE-DEG can directly drive 186 LEDs and powers a thermohygrometer via capacitor charging. This study provides a materials-level strategy for maintaining high-performance droplet energy harvesting under cold environmental conditions.
Authors
- Minjie Liu (ORCID: https://orcid.org/0009-0003-0703-8706)
- Mingshuai Li
- Yuxin Song
- Liansheng Xu
Institutions
- Central South University (CN)
- Tiangong University (CN)
Publication Details
- Journal
- ACS Applied Materials & Interfaces
- Published
- 2026-11-18
- DOI
- https://doi.org/10.1021/acsami.6c17806
- Primary Topic
- Advanced Sensor and Energy Harvesting Materials
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- National Natural Science Foundation of China