Experimental investigation and multi-criteria assessment of drilling in SiO₂-reinforced AZ91 magnesium composite under bio-based and cryogenic cooling conditions
Magnesium (Mg) alloys are attractive for biodegradable and lightweight applications, yet drilling-induced surface integrity remains sensitive to machining and cooling conditions. This study investigates the drilling behaviour of a 6 wt% silica (SiO₂) – reinforced AZ91 Mg composite fabricated by ultrasonic-assisted casting. Thirty distinct drilling conditions were evaluated using a structured mixed-level matrix by varying cutting speed (30–110 m/min), feed rate (0.05–0.15 mm/rev), tool type, and cooling/lubrication environment comprising vegetable oil, coconut oil, and liquid nitrogen (LN₂). Thrust force (F z ), torque (M z ), and surface roughness (R a ) were measured and ranked using MEREC–DNMA and LOPCOW–EDAS multi-criteria decision frameworks. Across the investigated matrix, higher cutting speed and feed rate were generally associated with increased F z , M z , and R a ; these trends are interpreted at the level of the complete drilling condition because the design does not independently separate coolant, tool, and interaction effects. Run 1 (30 m/min, 0.05 mm/rev, vegetable oil, HSS) was the best-ranked investigated condition, with F z = 118 N, M z = 0.23 N·m, and R a = 0.13 μm. Targeted macroscopic and SEM-EDS examination of retained Run 1 burr material revealed segmented and serrated morphology, lamellar shear ridges, plastic-flow bands, microcracks, and localized matrix tearing. The analyzed region was Mg-dominant and did not establish SiO₂ particle pull-out. The ranking identifies the best compromise within the tested domain, not a global process optimum. Vegetable and coconut oils remain candidate bio-based lubricants within the investigated domain; superiority over conventional mineral oil cannot be inferred without matched reference experiments.
Authors
- Syed Quadir Moinuddin (ORCID: https://orcid.org/0000-0003-1123-4104)
- Akbar Niaz (ORCID: https://orcid.org/0000-0003-0493-9771)
- Mohammad Faseeulla Khan (ORCID: https://orcid.org/0000-0002-5193-3260)
- Monaf Hodhod (ORCID: https://orcid.org/0009-0001-6623-637X)
- Sathish Kannan
- Vishwanath Nagallapati
- Hariharasakthisudhan Ponnarengan
- Logesh Kamaraj
Institutions
- Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology (IN)
- Symbiosis International University (IN)
- Amity University (AE)
- King Faisal University (SA)
Publication Details
- Journal
- Scientific Reports
- Published
- 2026-11-18
- DOI
- https://doi.org/10.1038/s41598-026-73818-8
- Primary Topic
- Advanced machining processes and optimization
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- King Faisal University