Effect of enamel surface pretreatment and thermocycling on shear bond strength of metallic orthodontic brackets bonded with a self-adhesive resin: An in vitro study

OBJECTIVE: This study evaluated the effect of different enamel surface treatments on the microshear bond strength and failure mode of orthodontic brackets bonded with a self-adhesive orthodontic resin before and after thermocycling. MATERIALS AND METHODS: Bovine enamel specimens were embedded in polyvinyl chloride tubes with chemically activated acrylic resin and allocated into four groups according to enamel surface treatment: self-adhesive resin (SAR), acid etching+SAR, airborne-particle abrasion+SAR, and acid etching+airborne-particle abrasion+SAR. Each group was divided into immediate and aged conditions (n=10). Acid etching was performed with 37% phosphoric acid for 30 s, and airborne-particle abrasion with 50-μm aluminium oxide for 10 s. Brackets were bonded using Ortholink One Step adhesive. Aged specimens underwent 20,000 thermal cycles (5-55°C). Microshear bond strength was measured using a universal testing machine, and failure mode was assessed with the Adhesive Remnant Index. Data were analysed using Tukey's test (α=0.05). RESULTS: Both surface treatment and thermocycling significantly influenced bond strength. In the immediate condition, air-abraded groups showed the highest bond strength (8.16-8.55MPa), significantly exceeding non-abraded groups (5.17-5.30MPa; P<0.001). After thermocycling, air-abraded groups maintained higher bond strength (5.24-5.89MPa) than the self-adhesive resin group (2.57±1.04MPa; (F(1,41)=42.68, P<0.001). Thermocycling significantly reduced bond strength in all groups (P≤0.049). Non-air-abraded groups exhibited only ARI score 0 failures, whereas air-abraded groups showed mixed failure patterns. CONCLUSION: Airborne-particle abrasion significantly improved bracket bond strength to intact enamel when using a self-adhesive orthodontic resin, although thermocycling reduced adhesion regardless of surface treatment.

Authors

Institutions

Publication Details

Journal
International Orthodontics
Published
2026-11-18
DOI
https://doi.org/10.1016/j.ortho.2026.101274
Primary Topic
Dental materials and restorations
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effect of enamel surface pretreatment and thermocycling on shear bond strength of metallic orthodontic brackets bonded with a self-adhesive resin: An in vitro study

Tainah Oliveira Rifane, Ranyele Elis Alexandre Rodrigues, Vitaliano Gomes de Araújo Neto, Ketelyn Kerty Moreira de Oliveira et al.
International Orthodontics
Dental materials and restorations
article

Effect of enamel surface pretreatment and thermocycling on shear bond strength of metallic orthodontic brackets bonded with a self-adhesive resin: An in vitro study

Tainah Oliveira Rifane, Ranyele Elis Alexandre Rodrigues, Vitaliano Gomes de Araújo Neto, Ketelyn Kerty Moreira de Oliveira, Anderson Gomes Forte, Alexandre Daher Yunes Salgado, Vitor Hugo Queiroz De Barros, Ingrid Silva de Lima, Isadora da Silva Ximenes
article en

Abstract

OBJECTIVE: This study evaluated the effect of different enamel surface treatments on the microshear bond strength and failure mode of orthodontic brackets bonded with a self-adhesive orthodontic resin before and after thermocycling. MATERIALS AND METHODS: Bovine enamel specimens were embedded in polyvinyl chloride tubes with chemically activated acrylic resin and allocated into four groups according to enamel surface treatment: self-adhesive resin (SAR), acid etching+SAR, airborne-particle abrasion+SAR, and acid etching+airborne-particle abrasion+SAR. Each group was divided into immediate and aged conditions (n=10). Acid etching was performed with 37% phosphoric acid for 30 s, and airborne-particle abrasion with 50-μm aluminium oxide for 10 s. Brackets were bonded using Ortholink One Step adhesive. Aged specimens underwent 20,000 thermal cycles (5-55°C). Microshear bond strength was measured using a universal testing machine, and failure mode was assessed with the Adhesive Remnant Index. Data were analysed using Tukey's test (α=0.05). RESULTS: Both surface treatment and thermocycling significantly influenced bond strength. In the immediate condition, air-abraded groups showed the highest bond strength (8.16-8.55MPa), significantly exceeding non-abraded groups (5.17-5.30MPa; P<0.001). After thermocycling, air-abraded groups maintained higher bond strength (5.24-5.89MPa) than the self-adhesive resin group (2.57±1.04MPa; (F(1,41)=42.68, P<0.001). Thermocycling significantly reduced bond strength in all groups (P≤0.049). Non-air-abraded groups exhibited only ARI score 0 failures, whereas air-abraded groups showed mixed failure patterns. CONCLUSION: Airborne-particle abrasion significantly improved bracket bond strength to intact enamel when using a self-adhesive orthodontic resin, although thermocycling reduced adhesion regardless of surface treatment.

International OrthodonticsVol. 25(1)
Universidade Estadual de Campinas (UNICAMP) (BR), Universidade Federal do Ceará (BR), Methodist University of Piracicaba (BR), Paulo Picanço School of Dentistry (BR)
Good health and well-being
Dental materials and restorations
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon