Ti Coating Regulation of MEMS Device Overload Resistance: Preparation, Characterization, and Application
This study proposes a method to enhance the overload resistance of silicon-based MEMS devices in high-impact environments using Ti metal coatings. Compared to Al, Ni, and Cu, Ti forms Ti–O–Si covalent bonds with single-crystal silicon, integrating excellent interfacial bonding and plastic energy dissipation. A 1 μm-thick Ti coating was deposited by magnetron sputtering, with low-temperature plasma surface activation improving the coating-substrate interface. Mechanical tests show surface activation enhances adhesion by 31.43% without significantly changing the coating’s intrinsic elastic modulus and hardness. A silicon-based MEMS electrothermal actuator has been used as a test case, impact tests demonstrate the Ti-coated device’s maximum undamaged impact amplitude increased from 18000 g to 21600 g (20.00% improvement). This study confirms Ti coatings effectively enhance MEMS structural reliability under high overload via the synergistic effects of interface strengthening and plastic energy dissipation.
Authors
- Wei Rong Nie (ORCID: https://orcid.org/0000-0001-7623-6827)
- Mo Yang
- He Wang
- Bao Lin Cheng
Institutions
- Nanjing University of Science and Technology (CN)
Publication Details
- Journal
- Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena
- Published
- 2026-11-18
- DOI
- https://doi.org/10.4028/p-kw1mf7
- Primary Topic
- Advanced MEMS and NEMS Technologies
- Type
- article
- Field-Weighted Citation Impact
- 0.00