Strength of gypsum-based building composites by additives of linen fiber

The strength properties of gypsum composites modified under introducing flax fibers - vegetable raw materials of the Altai Territory are considered. It is shown that linen fiber, under scientifically substantiated conditions of its preparation, can serve as a promising raw material to obtain molding gypsum masses, suitable after their hardening for construction work inside buildings and structures. A difference was found in the physical and mechanical properties of composites based on gypsum of grades G-3 and G-16, characterized by varied structural density. The effect of the degree of grinding of the reinforcing additive on the strength properties of gypsum composites and materials based thereon has been established. Medium or fine grinding of the linen fiber with a length of ≤3 mm on a disk mill, while limiting its addition in a gypsum composition G-3 B II increases its flexural strength up to 20-50%, and its compressive strength - up to 80%. It was revealed that the introduction of >1% of reinforcing fiber into high-strength gypsum of G-16 grade is impractical. Otherwise, the effect of excessive porosity begins to prevail over the effect of environmental friendliness, cheaper and expected reduction in the material consumption of the building composite.

Authors

Institutions

Publication Details

Journal
Building and reconstruction
Published
2026-11-17
DOI
https://doi.org/10.33979/2073-7416-2026-127-5-8
Primary Topic
Innovative concrete reinforcement materials
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Strength of gypsum-based building composites by additives of linen fiber

V.B. Dobrokhotov, Maksim O. Bakanov, Pavel B. Razgovorov, В А Кожухов et al.
Building and reconstruction
Innovative concrete reinforcement materials
article

Strength of gypsum-based building composites by additives of linen fiber

V.B. Dobrokhotov, Maksim O. Bakanov, Pavel B. Razgovorov, В А Кожухов, N. I. Orlov
article en

Abstract

The strength properties of gypsum composites modified under introducing flax fibers - vegetable raw materials of the Altai Territory are considered. It is shown that linen fiber, under scientifically substantiated conditions of its preparation, can serve as a promising raw material to obtain molding gypsum masses, suitable after their hardening for construction work inside buildings and structures. A difference was found in the physical and mechanical properties of composites based on gypsum of grades G-3 and G-16, characterized by varied structural density. The effect of the degree of grinding of the reinforcing additive on the strength properties of gypsum composites and materials based thereon has been established. Medium or fine grinding of the linen fiber with a length of ≤3 mm on a disk mill, while limiting its addition in a gypsum composition G-3 B II increases its flexural strength up to 20-50%, and its compressive strength - up to 80%. It was revealed that the introduction of >1% of reinforcing fiber into high-strength gypsum of G-16 grade is impractical. Otherwise, the effect of excessive porosity begins to prevail over the effect of environmental friendliness, cheaper and expected reduction in the material consumption of the building composite.

Building and reconstruction(5)
Moscow State University of Civil Engineering (RU), Yaroslavl State Technical University (RU)
Innovative concrete reinforcement materials
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon