Salt-Coated High-Temperature Corrosion of Vacuum-Brazed 316L Joints

This study investigated the salt-coated high-temperature corrosion behavior and post-corrosion mechanical properties of 316L stainless-steel joints vacuum-brazed with three typical nickel-based filler metals: Ni-Cr-B, Ni-Cr-B-Si and Ni-Cr-Si. Salt-coated corrosion tests were conducted at 850 °C in air with NaCl deposition for up to eight cycles. In B-containing joints, CrB precipitates formed in the diffusion-affected zone, and corrosion propagated inward along their distribution paths. In the Ni-Cr-Si joint, selective oxidation of the continuously distributed Ni₃Si phase induced volume expansion and cracking, accelerating localized corrosion. This continuous Ni₃Si network was suppressed in the Ni-Cr-B-Si joint, as B preferentially reacts with Cr to form boride precipitates, which alters the solidification path and solute segregation behavior and reduces the continuity of Si-rich intermetallic phases at the seam center. The corrosion resistance follows the order Ni-Cr-B > Ni-Cr-B-Si > Ni-Cr-Si. After eight cycles, the Ni-Cr-Si joint reaches a relative corrosion depth of approximately 145 μm, approximately 32% higher than that of the Ni-Cr-B joint. The Ni-Cr-B joint retains the highest post-corrosion tensile strength (339 MPa, 38% decrease from the as-brazed state), while the Ni-Cr-Si joint suffers the most severe degradation (130 MPa, 78% decrease). These findings provide a reference for filler metal selection in high-temperature chloride-laden service environments.

Authors

Institutions

Publication Details

Journal
Materials
Published
2026-11-18
DOI
https://doi.org/10.3390/ma19224882
Primary Topic
High-Temperature Coating Behaviors
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Salt-Coated High-Temperature Corrosion of Vacuum-Brazed 316L Joints

Xuesong Leng, Chengcheng Shuai, Linlin Song, Jun Mei et al.
3 links
Materials
High-Temperature Coating Behaviors
article

Salt-Coated High-Temperature Corrosion of Vacuum-Brazed 316L Joints

Xuesong Leng, Chengcheng Shuai, Linlin Song, Jun Mei, Minxing Liao, Jianchao He, Xiaoya Wang, Jun Liu, Lin Zhao, Lei Zhao
article en

Abstract

This study investigated the salt-coated high-temperature corrosion behavior and post-corrosion mechanical properties of 316L stainless-steel joints vacuum-brazed with three typical nickel-based filler metals: Ni-Cr-B, Ni-Cr-B-Si and Ni-Cr-Si. Salt-coated corrosion tests were conducted at 850 °C in air with NaCl deposition for up to eight cycles. In B-containing joints, CrB precipitates formed in the diffusion-affected zone, and corrosion propagated inward along their distribution paths. In the Ni-Cr-Si joint, selective oxidation of the continuously distributed Ni₃Si phase induced volume expansion and cracking, accelerating localized corrosion. This continuous Ni₃Si network was suppressed in the Ni-Cr-B-Si joint, as B preferentially reacts with Cr to form boride precipitates, which alters the solidification path and solute segregation behavior and reduces the continuity of Si-rich intermetallic phases at the seam center. The corrosion resistance follows the order Ni-Cr-B > Ni-Cr-B-Si > Ni-Cr-Si. After eight cycles, the Ni-Cr-Si joint reaches a relative corrosion depth of approximately 145 μm, approximately 32% higher than that of the Ni-Cr-B joint. The Ni-Cr-B joint retains the highest post-corrosion tensile strength (339 MPa, 38% decrease from the as-brazed state), while the Ni-Cr-Si joint suffers the most severe degradation (130 MPa, 78% decrease). These findings provide a reference for filler metal selection in high-temperature chloride-laden service environments.

MaterialsVol. 19(22)
Harbin Institute of Technology (CN), China Iron and Steel Research Institute Group (CN), Ansteel (China) (CN), University of Science and Technology Beijing (CN)
National Natural Science Foundation of China
High-Temperature Coating Behaviors
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon