High-voltage flat-tubular segment-in-series SOFCs: strategic design of an SrZrO 3 insulation layer

Flat-tubular segment-in-series solid oxide fuel cells (FT-SIS-SOFCs) offer a promising route for high-voltage SOFC systems; however, current leakage through conductive cermet supports remains a critical challenge, and the design principles for porous insulating layers that simultaneously provide electrical decoupling and sufficient gas transport have not been fully established. Herein, porous insulating layers were introduced between the support and the anode of an FT-SIS-SOFC to suppress current leakage through the cermet support and preserve gas transport. SrZrO3 (SZO) is a promising insulating material as it shows a stable perovskite structure at high temperatures and under a reducing atmosphere, and its resistivity is sufficiently high. Single cells with SZO insulating layer thicknesses from 0 µm to 108 µm were fabricated, and their performance exhibited a nonmonotonic thickness dependence. Thin SZO layers resulted in residual coupling between the anode and support, which introduced additional polarization. By contrast, excessively thick layers increased gas-transport resistance. The maximum A-C power density was achieved at an SZO thickness of approximately 73 µm, while a thickness range of 73-80 µm was identified as the practical optimal window for balancing electrical decoupling and gas transport. Using this optimized design, a 14-cell FT-SIS-SOFC was fabricated, with 12 cells effectively connected in series for power generation. The device delivered an open-circuit voltage of 12 V at 700 °C and a peak power density of 150 mW cm-2 at 800 °C. These results demonstrate the feasibility of porous SZO as an insulating layer for high-voltage FT-SIS-SOFCs.

Authors

Publication Details

Journal
Energy Materials
Published
2026-11-19
DOI
https://doi.org/10.20517/energymater.2026.256
Primary Topic
Advancements in Solid Oxide Fuel Cells
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

High-voltage flat-tubular segment-in-series SOFCs: strategic design of an SrZrO 3 insulation layer

Tengfei Ma, Haoyu Jiao, Shuwu Xu, Xiangxiang Pan et al.
2 links
Energy Materials
Advancements in Solid Oxide Fuel Cells
article

High-voltage flat-tubular segment-in-series SOFCs: strategic design of an SrZrO 3 insulation layer

Tengfei Ma, Haoyu Jiao, Shuwu Xu, Xiangxiang Pan, Ruyan Chen, Cheng-Xin Li, Changqing Liu, Yanan Li
article en

Abstract

Flat-tubular segment-in-series solid oxide fuel cells (FT-SIS-SOFCs) offer a promising route for high-voltage SOFC systems; however, current leakage through conductive cermet supports remains a critical challenge, and the design principles for porous insulating layers that simultaneously provide electrical decoupling and sufficient gas transport have not been fully established. Herein, porous insulating layers were introduced between the support and the anode of an FT-SIS-SOFC to suppress current leakage through the cermet support and preserve gas transport. SrZrO3 (SZO) is a promising insulating material as it shows a stable perovskite structure at high temperatures and under a reducing atmosphere, and its resistivity is sufficiently high. Single cells with SZO insulating layer thicknesses from 0 µm to 108 µm were fabricated, and their performance exhibited a nonmonotonic thickness dependence. Thin SZO layers resulted in residual coupling between the anode and support, which introduced additional polarization. By contrast, excessively thick layers increased gas-transport resistance. The maximum A-C power density was achieved at an SZO thickness of approximately 73 µm, while a thickness range of 73-80 µm was identified as the practical optimal window for balancing electrical decoupling and gas transport. Using this optimized design, a 14-cell FT-SIS-SOFC was fabricated, with 12 cells effectively connected in series for power generation. The device delivered an open-circuit voltage of 12 V at 700 °C and a peak power density of 150 mW cm-2 at 800 °C. These results demonstrate the feasibility of porous SZO as an insulating layer for high-voltage FT-SIS-SOFCs.

Energy MaterialsVol. 6(11)
Affordable and clean energy, Industry, innovation and infrastructure
Advancements in Solid Oxide Fuel Cells
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon