The Effect of Workpiece Material on Near-Dry EDM Process Efficiency: Case Study for Inconel 625 and Titanium Grade 2
Growing pressure to reduce the environmental impact of manufacturing has increased interest in electrical discharge machining (EDM) variants that limit liquid dielectric consumption. This study investigates near-dry EDM of Inconel 625 and Titanium Grade 2 using CO2 supplied to the machining gap. A modified central composite design comprising 25 experiments per material evaluated pulse duration, voltage, discharge current, and gas pressure over ranges of 100–500 µs, 80–120 V, 0.9–4.5 A, and 2–10 bar, respectively. Results were analysed for the material–polarity configurations Cu working electrode (+)/Inconel 625(−) and Cu working electrode(−)/Titanium Grade 2(+), reflecting their combined effects. The volumetric material-removal-rate models showed the strongest statistical performance, with values for ln(Vv) of 0.968 and 0.940, respectively, and captured the dominant response trends. Their comparatively strong statistical performance may be attributed to the integral nature of material removal, which partially averages stochastic variability among discharges. Roughness and electrode response were more sensitive to local crater formation and redeposition. Recast-layer and heat-affected-zone characteristics were interpreted in relation to thermophysical properties, microstructure, and polarity.
Authors
- Agnieszka Żyra (ORCID: https://orcid.org/0000-0001-6895-209X)
- Sebastian Skoczypiec (ORCID: https://orcid.org/0000-0002-6909-3132)
- Wojciech Bizoń
Institutions
- Cracow University of Technology (PL)
Publication Details
- Journal
- Materials
- Published
- 2026-11-18
- DOI
- https://doi.org/10.3390/ma19224881
- Primary Topic
- Advanced Machining and Optimization Techniques
- Type
- article
- Field-Weighted Citation Impact
- 0.00