Mechanical Performance of Paving Blocks Incorporating Bamboo Powder as Partial Fine Aggregate Replacement
This study investigates the feasibility of using bamboo powder as a partial replacement for fine aggregate in paving block production. Bamboo powder was incorporated at replacement levels of 0%, 30%, 35%, and 40% by weight of sand. Specimens with dimensions of 105 × 105 × 60 mm were prepared using a vibration-assisted hydraulic press and evaluated in accordance with SNI 03-0691-1996 after 28 days of moist curing. Three replicate specimens were cast for each mixture, and results are reported as mean ± standard deviation. The compressive strength decreased from 193.55 ± 8.24 kg/cm² for the control mixture to 97.96 ± 5.11 kg/cm² at 30% bamboo powder replacement, followed by a gradual increase to 106.22 ± 6.37 kg/cm² and 121.56 ± 7.92 kg/cm² at 35% and 40% replacement levels, respectively. All mixtures satisfied the requirements of Quality Category D (minimum 85 kg/cm²), suitable for parks and garden applications. Water absorption increased from 5.87 ± 0.21% for the control to 6.08–7.80% for bamboo powder contents of 30–40%, shifting the classification from Category B to Category C. An optimum bamboo powder replacement level of 30% is recommended based on the balanced performance between mechanical strength and water absorption. The findings demonstrate the potential of bamboo powder as a sustainable alternative material for non-structural paving block applications.
Authors
- Deddy Purnomo Retno (ORCID: https://orcid.org/0000-0003-2474-1199)
- Sushilawati Ismail
- Eriyan Kusuma
- Sri Hartati Dewi
- Harmiyati
Institutions
- Islamic University of Riau (ID)
- Tun Hussein Onn University of Malaysia (MY)
Publication Details
- Journal
- Evergreen
- Published
- 2026-11-21
- DOI
- https://doi.org/10.5109/7452636
- Primary Topic
- Materials Engineering and Processing
- Type
- article
- Field-Weighted Citation Impact
- 0.00