DDR3 SDRAM: Physical Organization, Electrical Design, and FPGA Controller Implementation Analysis of the Gowin GW2A-LV18 memory interface using the Tang Primer 20K platform as a reference
This article examines dynamic storage in DDR3 SDRAM, bank/row/column organization, electrical and timingrequirements, and the translation of processor memory requests into dynamic-memory operations. A public referencedesign for the Gowin GW2A-LV18 FPGA is used to identify the boundary between user-written Verilog, the memorycontroller (MC), and the physical interface (PHY) supplied as protected Gowin DDR3 Memory Interface IP. Source-codeinspection reveals address-alias-based capacity detection, a 128-bit pseudorandom test-data generator, and a finite-statemachine implementing two write/read passes. It also establishes that the second pass, named “inverted” in the RTL, doesnot actually invert the data bits. Reported results from testing a 1-Gbit DDR3 device are presented together with the limitsof their evidential value and the requirements for subsequent integration with a soft RISC-V processor
Authors
- Alex Malachevsky (ORCID: https://orcid.org/0009-0008-6009-3196)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-18
- DOI
- https://doi.org/10.5281/zenodo.24330362
- Primary Topic
- Embedded Systems and FPGA Applications
- Type
- article
- Field-Weighted Citation Impact
- 0.00