Exploratory Comparison of Right-Angle and Front-Face Geometries Using EEM Fluorescence Spectroscopy Coupled with PARAFAC for the Analysis of Arthrospira platensis from Lake Chad

Excitation–emission matrix (EEM) fluorescence spectroscopy coupled with parallel factor analysis (PARAFAC) can characterise complex algal matrices, but comparisons between acquisition geometries may be affected by sample preparation. This exploratory study compares right-angle (90°) and front-face fluorescence excitation–emission matrices (EEMs) and four-component PARAFAC models for Arthrospira platensis from the Lake Chad region. Seventeen distinct samples were investigated: sixteen regional samples and one commercial Arkopharma product analysed in duplicate, giving eighteen measurements per geometry. EEMs were recorded using a modular in-house spectrofluorometer over excitation and emission ranges of 270-610 nm and 280-800 nm, respectively, with a 2 nm increment and a 0.4 s integration time. The four-component models explained 96.70% and 96.47% of the variance, with core consistency diagnostic (CORCONDIA) values of 61.42% and 51.98% for right-angle and front-face measurements, respectively. The corresponding excitation/emission maxima were 370/452, 610/662, 390/464, and 590/626 nm, and 370/458, 610/666, 380/466, and 590/642 nm. Emission maxima differed by 2-16 nm, and relative scores also differed. These are descriptive observations: diluted solutions were used at 90°, whereas undiluted solutions were used in front-face geometry. Geometry and concentration are therefore confounded. The available results establish an exploratory comparison of two acquisition protocols; they do not establish geometry-specific sensitivity, reproducibility, or equivalence. Matched-concentration measurements, technical replication, and quantitative profile comparisons are required to test those properties.

Authors

Institutions

Publication Details

Journal
International Research Journal of Pure and Applied Chemistry
Published
2026-11-18
DOI
https://doi.org/10.9734/irjpac/2026/v27i61055
Primary Topic
Spectroscopy and Chemometric Analyses
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Exploratory Comparison of Right-Angle and Front-Face Geometries Using EEM Fluorescence Spectroscopy Coupled with PARAFAC for the Analysis of Arthrospira platensis from Lake Chad

Yacoub Idriss Halawlaw, Pale Wang-yang, Koyambo-Konzapa Stève-Jonathan, Zoutchibé Joseph et al.
International Research Journal of Pure and Applied Chemistry
Spectroscopy and Chemometric Analyses
article

Exploratory Comparison of Right-Angle and Front-Face Geometries Using EEM Fluorescence Spectroscopy Coupled with PARAFAC for the Analysis of Arthrospira platensis from Lake Chad

Yacoub Idriss Halawlaw, Pale Wang-yang, Koyambo-Konzapa Stève-Jonathan, Zoutchibé Joseph, Beunoné Davy, Kenfack Cyril Assongo
article en

Abstract

Excitation–emission matrix (EEM) fluorescence spectroscopy coupled with parallel factor analysis (PARAFAC) can characterise complex algal matrices, but comparisons between acquisition geometries may be affected by sample preparation. This exploratory study compares right-angle (90°) and front-face fluorescence excitation–emission matrices (EEMs) and four-component PARAFAC models for Arthrospira platensis from the Lake Chad region. Seventeen distinct samples were investigated: sixteen regional samples and one commercial Arkopharma product analysed in duplicate, giving eighteen measurements per geometry. EEMs were recorded using a modular in-house spectrofluorometer over excitation and emission ranges of 270-610 nm and 280-800 nm, respectively, with a 2 nm increment and a 0.4 s integration time. The four-component models explained 96.70% and 96.47% of the variance, with core consistency diagnostic (CORCONDIA) values of 61.42% and 51.98% for right-angle and front-face measurements, respectively. The corresponding excitation/emission maxima were 370/452, 610/662, 390/464, and 590/626 nm, and 370/458, 610/666, 380/466, and 590/642 nm. Emission maxima differed by 2-16 nm, and relative scores also differed. These are descriptive observations: diluted solutions were used at 90°, whereas undiluted solutions were used in front-face geometry. Geometry and concentration are therefore confounded. The available results establish an exploratory comparison of two acquisition protocols; they do not establish geometry-specific sensitivity, reproducibility, or equivalence. Matched-concentration measurements, technical replication, and quantitative profile comparisons are required to test those properties.

International Research Journal of Pure and Applied ChemistryVol. 27(6)
University of N'Djamena (TD), University of Douala (CM), University of Bangui (CF), Institut Universitaire Polytechnique de Mongo (TD), Université Saint Charles Lwanga (TD)
Spectroscopy and Chemometric Analyses
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon