Kinematically controlled FDM stringing of suspended anisotropic microfiber scaffolds for standardized 3D tissue engineering

Three-dimensional microenvironments with defined geometry and anisotropic architecture are essential for studying cell behavior and engineering tissue models that reflect native extracellular organization. Recent work has shown that molten stringing in fused deposition modeling (FDM) can be used to fabricate ordered polymer microfiber networks. However, broader application in standardized 3D cell culture is still limited by insufficient process parameterization, incomplete kinematic description of fiber drawing, and a lack of digitally transferable toolpath strategies. Here, we establish a kinematically quantified and digitally parameterized FDM-based workflow for generating suspended anisotropic PLA microfiber architectures with controlled spatial organization. Using a customized high-speed CoreXY printer, experimentally determined motion limits were related to the theoretical process window defined by acceleration, velocity, and travel distance. In parallel, mathematically defined toolpaths were implemented through a Python-based FullControl workflow, enabling programmable control over fiber orientation, spacing, anchoring positions, layer organization, and non-extrusion drawing movements. Under defined drawing conditions, suspended PLA microfibers with diameters of 39.8 ± 3.5 µm were reproducibly generated and assembled into multilayer anisotropic constructs with predictable spatial architecture. Mechanical testing confirmed consistent tensile behavior, with failure occurring within the homogeneous fiber segment rather than at anchoring regions. In proof-of-concept experiments, surface activation and fibronectin coating enabled cell adhesion, supporting fibroblast and motoneuron-like cell attachment within the suspended architectures. Overall, this work advances FDM-based microfiber stringing from a fabrication phenomenon to a reproducible, kinematically defined, and digitally transferable platform for standardized anisotropic 3D microenvironments in biofabrication, mechanobiology, and in vitro model systems.

Authors

Institutions

Publication Details

Journal
Frontiers in Materials
Published
2026-11-18
DOI
https://doi.org/10.3389/fmats.2026.1936349
Primary Topic
3D Printing in Biomedical Research
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Kinematically controlled FDM stringing of suspended anisotropic microfiber scaffolds for standardized 3D tissue engineering

Stefania Cortopassi, Gregor Lang, Zan Lamberger, Matthias Ryma et al.
Frontiers in Materials
3D Printing in Biomedical Research
article

Kinematically controlled FDM stringing of suspended anisotropic microfiber scaffolds for standardized 3D tissue engineering

Stefania Cortopassi, Gregor Lang, Zan Lamberger, Matthias Ryma, Nicoletta Murenu, Natascha Schaefer, Sarah Zwingelberg, Peter Schönhammer
article en

Abstract

Three-dimensional microenvironments with defined geometry and anisotropic architecture are essential for studying cell behavior and engineering tissue models that reflect native extracellular organization. Recent work has shown that molten stringing in fused deposition modeling (FDM) can be used to fabricate ordered polymer microfiber networks. However, broader application in standardized 3D cell culture is still limited by insufficient process parameterization, incomplete kinematic description of fiber drawing, and a lack of digitally transferable toolpath strategies. Here, we establish a kinematically quantified and digitally parameterized FDM-based workflow for generating suspended anisotropic PLA microfiber architectures with controlled spatial organization. Using a customized high-speed CoreXY printer, experimentally determined motion limits were related to the theoretical process window defined by acceleration, velocity, and travel distance. In parallel, mathematically defined toolpaths were implemented through a Python-based FullControl workflow, enabling programmable control over fiber orientation, spacing, anchoring positions, layer organization, and non-extrusion drawing movements. Under defined drawing conditions, suspended PLA microfibers with diameters of 39.8 ± 3.5 µm were reproducibly generated and assembled into multilayer anisotropic constructs with predictable spatial architecture. Mechanical testing confirmed consistent tensile behavior, with failure occurring within the homogeneous fiber segment rather than at anchoring regions. In proof-of-concept experiments, surface activation and fibronectin coating enabled cell adhesion, supporting fibroblast and motoneuron-like cell attachment within the suspended architectures. Overall, this work advances FDM-based microfiber stringing from a fabrication phenomenon to a reproducible, kinematically defined, and digitally transferable platform for standardized anisotropic 3D microenvironments in biofabrication, mechanobiology, and in vitro model systems.

Frontiers in MaterialsVol. 13
Düsseldorf University Hospital (DE), Universitätsklinikum Würzburg (DE), Heinrich Heine University Düsseldorf (DE), University of Bayreuth (DE)
Deutsche Forschungsgemeinschaft
3D Printing in Biomedical Research
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon