High-Cycle Fatigue Behavior and Fatigue Crack Growth at 450 °C in a Dissimilar 2.25Cr/Modified FB2 Welded Rotor Joint
High-cycle fatigue (HCF) and fatigue crack growth (FCG) were investigated in a dissimilar 2.25Cr (10325MTE)/modified FB2 (MTR10A) welded rotor joint. Room-temperature HCF tests were performed at stress ratios R = − 1, − 0.5, and 0.1, followed by scanning electron microscopy and energy-dispersive X-ray spectroscopy of selected fracture surfaces. FCG tests at 450°C covered the root weld metal, near-outer-surface weld metal, and both heat-affected zones at R = 0.1, 0.4, and 0.7. The conditional fatigue strengths at 10⁷ cycles, expressed as maximum stress, were 300, 383, and 550 MPa, respectively, corresponding to stress amplitudes of 300.0, 287.5, and 247.5 MPa. The decreasing allowable stress amplitude was associated with increasing tensile mean stress. Fatigue striations and localized quasi-cleavage-like features occurred in stable propagation regions, while dimples predominated in final fracture regions. Initiation sites included surface discontinuities and regions adjacent to subsurface particles. Paris relationships described stable FCG in all 24 compact-tension specimens. At ΔK = 20 MPa·m¹ᐟ² and R = 0.1, mean fitted FCG rates were 3.54 × 10⁻⁵ and 5.68 × 10⁻⁵ mm/cycle in the left and right heat-affected zones, respectively. For the root weld metal, the mean fitted rate at R = 0.4 (1.16 × 10⁻⁴ mm/cycle) exceeded that at R = 0.7 (9.34 × 10⁻⁵ mm/cycle). The FCG response depended on joint region and stress ratio, with different levels of scatter between paired specimens.
Authors
- Lingjian Meng
- Feipeng Yang
- Zhicheng Su
- Ruihang Liu
- Yan Du
- Bo Wang
Institutions
- Harbin Welding Institute (CN)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-18
- DOI
- https://doi.org/10.21203/rs.3.rs-11386290/v1
- Primary Topic
- Fatigue and fracture mechanics
- Type
- preprint