Microwave-assisted upgrading of quartz-rich iron ore tailings for the production of high-purity silica via magnetic separation and acid leaching

Quartz-rich iron ore tailings represent a potential secondary source of silica, although residual impurity-bearing phases may limit purification by conventional separation routes. This study investigated the influence of microwave irradiation on the upgrading of iron ore flotation tailings through magnetic separation and subsequent mixed-acid leaching. Microwave treatments were performed at 700, 1100, and 1600 W under different irradiation times, with and without water quenching. The most pronounced microstructural changes were obtained at 1600 W for 6 min. BET specific surface area increased from 1.1382 m 2 /g in the feed to 2.7302 m 2 /g without quenching and 1.8437 m 2 /g with quenching, while SEM revealed micrometre-scale cracks without detectable mineralogical transformation. After ultrasound-assisted staged magnetic separation up to 1.0 T, the selected products contained 91.93 and 90.73 % SiO 2 , respectively. Their response to acid leaching was enhanced compared with the untreated control, with Fe removal reaching 99.8 and 99.7 %, accompanied by high removals of Al, K, and Mg. After two leaching stages, SiO 2 contents reached 99.76 and 99.82 %, increasing to 99.92 and 99.91 % after a third stage. Residual Fe concentrations decreased to 76 and 141 ppm, respectively, while XRF independently indicated 99.94 % SiO 2 for both final products. XRD confirmed α-quartz as the predominant crystalline phase, and SEM–EDS showed only sparse residual Fe- and Al-rich regions.

Authors

Institutions

Publication Details

Journal
Minerals Engineering
Published
2026-11-18
DOI
https://doi.org/10.1016/j.mineng.2026.111052
Primary Topic
Mineral Processing and Grinding
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Microwave-assisted upgrading of quartz-rich iron ore tailings for the production of high-purity silica via magnetic separation and acid leaching

Melina Savioli Lopes, Thalles Henrique Faria de Souza, Gabriel Mateus Cubi Fonseca, Guilherme José Oliveira Cubi et al.
1 links
Minerals Engineering
Mineral Processing and Grinding
article

Microwave-assisted upgrading of quartz-rich iron ore tailings for the production of high-purity silica via magnetic separation and acid leaching

Melina Savioli Lopes, Thalles Henrique Faria de Souza, Gabriel Mateus Cubi Fonseca, Guilherme José Oliveira Cubi, VILSON CARLESSO DOS REIS, Eduardo Henrique Lessa, Arthur Mestre Silvino
article en

Abstract

Quartz-rich iron ore tailings represent a potential secondary source of silica, although residual impurity-bearing phases may limit purification by conventional separation routes. This study investigated the influence of microwave irradiation on the upgrading of iron ore flotation tailings through magnetic separation and subsequent mixed-acid leaching. Microwave treatments were performed at 700, 1100, and 1600 W under different irradiation times, with and without water quenching. The most pronounced microstructural changes were obtained at 1600 W for 6 min. BET specific surface area increased from 1.1382 m 2 /g in the feed to 2.7302 m 2 /g without quenching and 1.8437 m 2 /g with quenching, while SEM revealed micrometre-scale cracks without detectable mineralogical transformation. After ultrasound-assisted staged magnetic separation up to 1.0 T, the selected products contained 91.93 and 90.73 % SiO 2 , respectively. Their response to acid leaching was enhanced compared with the untreated control, with Fe removal reaching 99.8 and 99.7 %, accompanied by high removals of Al, K, and Mg. After two leaching stages, SiO 2 contents reached 99.76 and 99.82 %, increasing to 99.92 and 99.91 % after a third stage. Residual Fe concentrations decreased to 76 and 141 ppm, respectively, while XRF independently indicated 99.94 % SiO 2 for both final products. XRD confirmed α-quartz as the predominant crystalline phase, and SEM–EDS showed only sparse residual Fe- and Al-rich regions.

Minerals EngineeringVol. 251
Universidade Federal de Alfenas (BR)
Fundação de Amparo à Pesquisa do Estado de Minas Gerais
Responsible consumption and production
Mineral Processing and Grinding
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon