Numerical Evaluation and Parametric Assessment of O-Grid Bracing Systems Using Rectangular and Circular Hollow Sections
Resilient infrastructure in seismic regions requires bracing systems that add stiffness, strength and energy dissipation to steel moment-resisting frames. This study evaluates O-grid circular bracing with rings of rectangular (RHSs) and circular hollow sections (CHSs). Cyclic ABAQUS analyses, checked against published tests on a bare frame and two O-grid-braced frames, compared O-grid rings of I-, H-, RHS and CHS sections at equal steel area and assessed 15 RHS and six CHS rings parametrically. The O-grid frames raised the initial stiffness of the bare frame by 5–51%, its peak load by 19–47% and its dissipated energy by about 35–80%. The RHS and I-section rings differed by less than 4% in peak load and 7% in energy; both buckled out of plane in two half-waves, by up to 109 mm (RHS) and 223 mm (I-section). Ductility at the largest imposed displacement was similar (μ ≈ 6.4–7.1). Raising the RHS aspect ratio from 1 to 3 increased the stiffness by 31% but the peak load by only 6%, with out-of-plane and distortional buckling from h/b = 2; varying the CHS D/t from 14 to 61 changed the peak load and energy by about 5%. The results quantify the trade-off between strength, stiffness and stability.
Authors
- A R Avinash (ORCID: https://orcid.org/0000-0003-0941-2389)
- P. Subrahmanya V. Bhat (ORCID: https://orcid.org/0000-0002-6214-9420)
- Mitthur Chaithra (ORCID: https://orcid.org/0000-0002-3636-5488)
- K. N. Adarsha
- Radhika Sasindran
Institutions
- Manipal Academy of Higher Education (IN)
Publication Details
- Journal
- Infrastructures
- Published
- 2026-11-18
- DOI
- https://doi.org/10.3390/infrastructures11110428
- Primary Topic
- Seismic Performance and Analysis
- Type
- article
- Field-Weighted Citation Impact
- 0.00