Comparative Investigation of Mechanical Properties of FDM-Printed Polymer Materials for Lower-Limb Prosthetic Applications

Abstract: This study compares the tensile and flexural properties of four fused deposition modelling (FDM)-printed polymer systems—polylactic acid (PLA), glycol-modified polyethylene terephthalate (PETG), high-impact polystyrene (HIPS), and carbon-nanofiber-reinforced nylon (N+CF)—as preliminary candidates for lower-limb prosthetic component development. The recorded ultimate tensile strengths were 38.0, 34.5, 7.5, and 16.7 MPa, respectively, while the corresponding flexural strengths were 70.0, 60.0, 10.5, and 31.5 MPa. PLA exhibited the greatest mechanical resistance under both loading modes, followed by PETG, N+CF, and HIPS. Compared with PETG, PLA demonstrated 10.1% higher tensile strength and 16.7% higher flexural strength. Flexural-to-tensile strength ratios ranged from 1.40 (HIPS) to 1.89 (N+CF). These trends are evaluated in terms of polymer deformation behavior, inter-road bonding integrity, manufacturing defects, and processing parameters. While the experimental results provide a quantitative baseline for preliminary material screening, establishing clinical structural adequacy requires subsequent fatigue testing, statistical replication, and full-scale component validation.

Authors

Institutions

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-17
DOI
https://doi.org/10.5281/zenodo.24300775
Primary Topic
Additive Manufacturing and 3D Printing Technologies
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Comparative Investigation of Mechanical Properties of FDM-Printed Polymer Materials for Lower-Limb Prosthetic Applications

C. Senthamarai Kannan, B. Arun, K. Harish, P. Aravindkumar
Zenodo (CERN European Organization for Nuclear Research)
Additive Manufacturing and 3D Printing Technologies
article

Comparative Investigation of Mechanical Properties of FDM-Printed Polymer Materials for Lower-Limb Prosthetic Applications

C. Senthamarai Kannan, B. Arun, K. Harish, P. Aravindkumar
article en

Abstract

Abstract: This study compares the tensile and flexural properties of four fused deposition modelling (FDM)-printed polymer systems—polylactic acid (PLA), glycol-modified polyethylene terephthalate (PETG), high-impact polystyrene (HIPS), and carbon-nanofiber-reinforced nylon (N+CF)—as preliminary candidates for lower-limb prosthetic component development. The recorded ultimate tensile strengths were 38.0, 34.5, 7.5, and 16.7 MPa, respectively, while the corresponding flexural strengths were 70.0, 60.0, 10.5, and 31.5 MPa. PLA exhibited the greatest mechanical resistance under both loading modes, followed by PETG, N+CF, and HIPS. Compared with PETG, PLA demonstrated 10.1% higher tensile strength and 16.7% higher flexural strength. Flexural-to-tensile strength ratios ranged from 1.40 (HIPS) to 1.89 (N+CF). These trends are evaluated in terms of polymer deformation behavior, inter-road bonding integrity, manufacturing defects, and processing parameters. While the experimental results provide a quantitative baseline for preliminary material screening, establishing clinical structural adequacy requires subsequent fatigue testing, statistical replication, and full-scale component validation.

Zenodo (CERN European Organization for Nuclear Research)
Sri Venkateswara University (IN)
Additive Manufacturing and 3D Printing Technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon