A New Shaped Disturbance Observer to Improve Stability in a Time-Delayed Steering Control System for a Corner Module
Conventional disturbance observers improve disturbance rejection in steer-by-wire corner modules. However, feedback delay and higher observer gain strengthen the compensation–delay coupling, aggravating wheel-angle vibration and shrinking the closed-loop stability region. To address this conflict, a shaped disturbance observer is proposed. The shaped disturbance observer improves the estimation of time-varying wheel-end disturbance torque, while a shaping filter reconfigures the magnitude and phase characteristics of the compensation channel. Based on the corner module dynamics, a delay-dependent closed-loop characteristic equation is derived, and stability boundaries are evaluated using frequency-domain boundary curves and characteristic roots. With the observers tuned using a common nominal error-pole location, the shaped disturbance observer exhibits smaller estimation phase lag at all four tested frequencies, while its root mean square estimation error varies relative to that of the conventional disturbance observer with disturbance frequency. Under identical feedback delays, its stability region area is 8.3–91.4% larger than that of the conventional disturbance observer. Simulation results quantify the trade-offs among disturbance estimation accuracy, compensation bandwidth, and closed-loop stability.
Authors
- Ning Zhang (ORCID: https://orcid.org/0000-0002-3397-2522)
- 桑成好
- Zihong Li (ORCID: https://orcid.org/0009-0006-4317-0829)
- Hui Shen
Institutions
- Southeast University (CN)
- Yangzhou University (CN)
Publication Details
- Journal
- Actuators
- Published
- 2026-11-18
- DOI
- https://doi.org/10.3390/act15110613
- Primary Topic
- Vehicle Dynamics and Control Systems
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- National Natural Science Foundation of China