A spline representation of material properties for laminates, with application to classical laminate theory
The presented work proposes a continuous spline-based representation for the material properties through laminates. A continuous representation is useful when material properties vary over a finite region. The spline representation is applied for classical laminate theory (CLT) to calculate the extensional, coupling, and bending stiffness matrices. Within the laminate, adjacent constitutive states are connected through smooth transitions defined by arithmetic interpolation with a cubic polynomial blending function. This produces a continuously differentiable stiffness field with prescribed transition widths. Explicit expressions are derived for the differences between the spline formulation and the corresponding laminate with sharp interfaces, allowing both symmetric and asymmetric transitions. Symmetric transitions preserve extensional stiffness exactly, while coupling and bending stiffness generally differ. On the other hand, asymmetric transitions can modify all three stiffness matrices. The representation recovers the sharp interface description, as seen in CLT, when the transition widths tend to zero. This provides a framework for assessing how assumed stiffness gradients can influence laminate response. The presented representation's transition widths should be based on the material properties, physical limitations, and/or manufacturing process.
Authors
- Tanja Emilie Henriksen (ORCID: https://orcid.org/0009-0005-9869-0605)
- Joachim Jørgensen Ågotnes
Institutions
- UiT The Arctic University of Norway (NO)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-18
- DOI
- https://doi.org/10.21203/rs.3.rs-11596362/v1
- Primary Topic
- Composite Structure Analysis and Optimization
- Type
- preprint