Performance of Concrete with Mass-Based Sand Replacement by Waste Cast-Iron Machining Chips

This study evaluated seven concrete formulations: an unmodified reference (R0), a steel-fiber comparator (RF), and five mixtures in which 10–50% of the initial sand mass was replaced with dry, irregular cast-iron machining chips (nominal particle size: 0–4 mm). The waste was characterized by sieve analysis, density measurements, and energy-dispersive X-ray fluorescence (ED-XRF). The mixtures were assessed for slump, saturated density, 28-day bending and compressive strength, Böhme abrasion resistance, and responses to 50 freeze–thaw cycles and 48 h of exposure to 5% NaCl fog. Mass-based replacement altered the theoretical aggregate volume and paste-to-aggregate volume ratio; admixture dosage and slump also varied. Specimen-level Dunnett comparisons indicated higher mean compressive strengths for RW2, RW4, and RW5 than for R0 (adjusted p < 0.05), although only one batch for hardened-property testing was produced per formulation. RW5 achieved a mean compressive strength of 48.4 MPa and a reported mean Böhme volume loss of 9.6 cm3, compared with 13.3 cm3 for R0 (a 27.8% reduction). Abrasion resistance thus appears to be the most promising response of these specific formulations, although the density basis used for the original abrasion volume-loss conversion could not be independently verified. Neither the 50-cycle freeze–thaw test nor the 48 h salt-spray exposure establishes long-term frost or chloride durability. The study demonstrates feasibility at the formulation level, rather than an isolated metallic reinforcement mechanism or a generally optimal replacement level.

Authors

Institutions

Publication Details

Journal
Materials
Published
2026-11-18
DOI
https://doi.org/10.3390/ma19224880
Primary Topic
Materials Engineering and Processing
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Performance of Concrete with Mass-Based Sand Replacement by Waste Cast-Iron Machining Chips

Bogdan Langier, Izabela Major
1 links
Materials
Materials Engineering and Processing
article

Performance of Concrete with Mass-Based Sand Replacement by Waste Cast-Iron Machining Chips

Bogdan Langier, Izabela Major
article en

Abstract

This study evaluated seven concrete formulations: an unmodified reference (R0), a steel-fiber comparator (RF), and five mixtures in which 10–50% of the initial sand mass was replaced with dry, irregular cast-iron machining chips (nominal particle size: 0–4 mm). The waste was characterized by sieve analysis, density measurements, and energy-dispersive X-ray fluorescence (ED-XRF). The mixtures were assessed for slump, saturated density, 28-day bending and compressive strength, Böhme abrasion resistance, and responses to 50 freeze–thaw cycles and 48 h of exposure to 5% NaCl fog. Mass-based replacement altered the theoretical aggregate volume and paste-to-aggregate volume ratio; admixture dosage and slump also varied. Specimen-level Dunnett comparisons indicated higher mean compressive strengths for RW2, RW4, and RW5 than for R0 (adjusted p < 0.05), although only one batch for hardened-property testing was produced per formulation. RW5 achieved a mean compressive strength of 48.4 MPa and a reported mean Böhme volume loss of 9.6 cm3, compared with 13.3 cm3 for R0 (a 27.8% reduction). Abrasion resistance thus appears to be the most promising response of these specific formulations, although the density basis used for the original abrasion volume-loss conversion could not be independently verified. Neither the 50-cycle freeze–thaw test nor the 48 h salt-spray exposure establishes long-term frost or chloride durability. The study demonstrates feasibility at the formulation level, rather than an isolated metallic reinforcement mechanism or a generally optimal replacement level.

MaterialsVol. 19(22)
Częstochowa University of Technology (PL)
Responsible consumption and production
Materials Engineering and Processing
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon