Comparison of LES-based and inferred flame transfer functions of a complex industrial scale burner
This article explores the flame transfer function (FTF) behaviour of an industrial scale burner using Large Eddy Simulations (LES). There is often a mismatch between the measured FTF using the multi-microphone method (MMM) and the computed one using the integrated heat release rate method. In this work, we show that LES of such burners using an incompressible solver can provide a reasonable prediction of the FTF, but it is, however, required to correct the measured FTF using an low-order flame response model based on Bayesian inference which takes into account the complex geometrical features of such burner which are not considered using the MMM. We also highlight the significance of an appropriate reference signal definition by examining how the mass flow rate fluctuations are distributed inside the injector. Finally, a sensitivity study in terms of modelling is also performed by comparing the flamelet generated manifolds and dynamically thickened flame combustion models and Vreman–Smagorinsky and Sigma turbulence models.
Authors
- Matthew Yoko (ORCID: https://orcid.org/0009-0003-4620-8704)
- Léo C. C. Mesquita (ORCID: https://orcid.org/0000-0001-5086-696X)
- Dimitrios P. Kallifronas (ORCID: https://orcid.org/0000-0002-1294-7272)
- Claus Lahiri
- R.S. Cant (ORCID: https://orcid.org/0000-0003-1851-6665)
- André Fischer
Institutions
- Rolls-Royce (Germany) (DE)
- University of Cambridge (GB)
- Rolls-Royce (United Kingdom) (GB)
Publication Details
- Journal
- International Journal of Spray and Combustion Dynamics
- Published
- 2026-11-18
- DOI
- https://doi.org/10.1177/17568277261503424
- Primary Topic
- Combustion and flame dynamics
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- HORIZON EUROPE Framework Programme