Study on Polymer Damping Technology for Mountain Tunnels in Strong Earthquake-Prone Areas

To address the seismic challens faced by mountain tunnels in earthquake-prone areas, this study proposes a novel integrated seismic mitigation and anti-seepage solution using a non-water-reactive two-component foamed polymer to directly replace conventional waterproof boards. Compared with traditional damping materials, this material offers the advantages of light weight, high toughness, excellent impermeability, long-term stability and convenient construction. The effects of the configuration, location, thickness, and density of the polymer damping layer on its damping performance were investigated through dynamic nonlinear time-history analysis using an implicit integration method. The results show that a full-section polymer damping layer installed between the primary and secondary linings exhibited the best performance. Under bidirectional seismic excitations, the peak maximum principal stress, peak minimum principal stress, and plastic zone area of the tunnel lining were reduced by an average of 53%, 55% and 47%, respectively. With increasing damping layer thickness, the damping effect increased rapidly and then became relatively stable. As the density of the damping layer increased, the seismic dynamic response of the tunnel lining exhibited three-stage characteristics, namely, a relatively stable stage, a rapid-growth stage, and a slow-growth stage. For a specific tunnel project, considering both the seismic mitigation effect and economic efficiency, a density of 150–250 kg/m3 and a thickness of approximately 0.10 m are recommended for the damping layer. According to different surrounding rock grades (III–V) and seismic fortification intensities (8–9), design schemes and recommended parameters for the polymer damping layer in the composite lining of mountain tunnels are proposed. Furthermore, a spraying construction technique for the polymer damping layer is proposed and demonstrated in a tunnel project.

Authors

Institutions

Publication Details

Journal
Materials
Published
2026-11-18
DOI
https://doi.org/10.3390/ma19224884
Primary Topic
Geotechnical Engineering and Underground Structures
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Study on Polymer Damping Technology for Mountain Tunnels in Strong Earthquake-Prone Areas

Bo Sun, Ge Zhang, Rui Liu
4 links
Materials
Geotechnical Engineering and Underground Structures
article

Study on Polymer Damping Technology for Mountain Tunnels in Strong Earthquake-Prone Areas

Bo Sun, Ge Zhang, Rui Liu
article en

Abstract

To address the seismic challens faced by mountain tunnels in earthquake-prone areas, this study proposes a novel integrated seismic mitigation and anti-seepage solution using a non-water-reactive two-component foamed polymer to directly replace conventional waterproof boards. Compared with traditional damping materials, this material offers the advantages of light weight, high toughness, excellent impermeability, long-term stability and convenient construction. The effects of the configuration, location, thickness, and density of the polymer damping layer on its damping performance were investigated through dynamic nonlinear time-history analysis using an implicit integration method. The results show that a full-section polymer damping layer installed between the primary and secondary linings exhibited the best performance. Under bidirectional seismic excitations, the peak maximum principal stress, peak minimum principal stress, and plastic zone area of the tunnel lining were reduced by an average of 53%, 55% and 47%, respectively. With increasing damping layer thickness, the damping effect increased rapidly and then became relatively stable. As the density of the damping layer increased, the seismic dynamic response of the tunnel lining exhibited three-stage characteristics, namely, a relatively stable stage, a rapid-growth stage, and a slow-growth stage. For a specific tunnel project, considering both the seismic mitigation effect and economic efficiency, a density of 150–250 kg/m3 and a thickness of approximately 0.10 m are recommended for the damping layer. According to different surrounding rock grades (III–V) and seismic fortification intensities (8–9), design schemes and recommended parameters for the polymer damping layer in the composite lining of mountain tunnels are proposed. Furthermore, a spraying construction technique for the polymer damping layer is proposed and demonstrated in a tunnel project.

MaterialsVol. 19(22)
Ministry of Water Resources of the People's Republic of China (CN), Yellow River Institute of Hydraulic Research (CN)
Industry, innovation and infrastructure, Sustainable cities and communities
Geotechnical Engineering and Underground Structures
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon