SMART DOOR LOCKING SYSTEM USING ARDUINO

Doors in homes, laboratories, hostels, and offices are still secured mostly with mechanical locks and keys, which can be lost, copied, or shared without the owner's knowledge, and which give no record of who entered and when. Electronic access control systems solve many of these problems, but commercial units are costly and are often built as closed products that are difficult to repair or adapt. This paper presents a Smart Door Locking System Using Arduino that provides keypad, RFID, and mobile based access to a door through an electrically operated lock, with careful attention to the power supply and drive circuits that make such a lock reliable in daily use. The system uses an Arduino UNO as the main controller. A 4x4 matrix keypad accepts a personal identification number, an MFRC522 RFID reader identifies authorised cards and tags, and an ESP8266 Wi-Fi module allows the door to be opened from a mobile application and sends entry records to a cloud server. The door is secured with a 12 V solenoid lock driven through a logic-level MOSFET with a flyback diode, and a reed switch confirms whether the door is actually closed. A 16x2 LCD with I2C interface guides the user, and a buzzer gives audible feedback. Because the lock must work during power cuts, the design includes a 12 V power supply with a small lead-acid or lithium battery backup, a charging circuit, and a buck converter that provides 5 V for the Arduino and modules. The controller monitors the supply voltage and the lock coil current, detects a failed or jammed solenoid, and reports low battery before the backup runs out. The unlock pulse is limited in duration so that the solenoid coil does not overheat, and the lock is designed as fail-secure so that the door stays locked if power is lost. Security features include lockout after three wrong PIN attempts, an intruder alert when the reed switch shows the door opened without a valid unlock, and an alarm when the door is left open beyond a set time. All events are stored with time stamps from a DS3231 real time clock, kept in local memory when the network is down, and uploaded to the cloud when it returns. The owner can add or remove users and view the access log from the mobile application. Temporary codes that expire after a set time can also be issued to visitors or service staff. The prototype was tested on a wooden door frame over several hundred lock and unlock cycles. Keypad and RFID access worked reliably, the average time from valid credential to unlock was under one second, the battery backup kept the system operating for more than ten hours, and the coil temperature remained within safe limits. The work shows that a practical and maintainable smart lock can be built from common Arduino components.

Authors

Publication Details

Journal
International Journal of AI Electrical Civil and Mechanical engineering
Published
2026-11-17
DOI
https://doi.org/10.64751/asbt4653
Primary Topic
Arduino and IoT Applications
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

SMART DOOR LOCKING SYSTEM USING ARDUINO

K. Abhinaya Sri, N. Veera Swami, Sunkey Ajay, B. Veera Kumar et al.
International Journal of AI Electrical Civil and Mechanical engineering
Arduino and IoT Applications
article

SMART DOOR LOCKING SYSTEM USING ARDUINO

K. Abhinaya Sri, N. Veera Swami, Sunkey Ajay, B. Veera Kumar, G. Sai Prem, D. Mallesham
article en

Abstract

Doors in homes, laboratories, hostels, and offices are still secured mostly with mechanical locks and keys, which can be lost, copied, or shared without the owner's knowledge, and which give no record of who entered and when. Electronic access control systems solve many of these problems, but commercial units are costly and are often built as closed products that are difficult to repair or adapt. This paper presents a Smart Door Locking System Using Arduino that provides keypad, RFID, and mobile based access to a door through an electrically operated lock, with careful attention to the power supply and drive circuits that make such a lock reliable in daily use. The system uses an Arduino UNO as the main controller. A 4x4 matrix keypad accepts a personal identification number, an MFRC522 RFID reader identifies authorised cards and tags, and an ESP8266 Wi-Fi module allows the door to be opened from a mobile application and sends entry records to a cloud server. The door is secured with a 12 V solenoid lock driven through a logic-level MOSFET with a flyback diode, and a reed switch confirms whether the door is actually closed. A 16x2 LCD with I2C interface guides the user, and a buzzer gives audible feedback. Because the lock must work during power cuts, the design includes a 12 V power supply with a small lead-acid or lithium battery backup, a charging circuit, and a buck converter that provides 5 V for the Arduino and modules. The controller monitors the supply voltage and the lock coil current, detects a failed or jammed solenoid, and reports low battery before the backup runs out. The unlock pulse is limited in duration so that the solenoid coil does not overheat, and the lock is designed as fail-secure so that the door stays locked if power is lost. Security features include lockout after three wrong PIN attempts, an intruder alert when the reed switch shows the door opened without a valid unlock, and an alarm when the door is left open beyond a set time. All events are stored with time stamps from a DS3231 real time clock, kept in local memory when the network is down, and uploaded to the cloud when it returns. The owner can add or remove users and view the access log from the mobile application. Temporary codes that expire after a set time can also be issued to visitors or service staff. The prototype was tested on a wooden door frame over several hundred lock and unlock cycles. Keypad and RFID access worked reliably, the average time from valid credential to unlock was under one second, the battery backup kept the system operating for more than ten hours, and the coil temperature remained within safe limits. The work shows that a practical and maintainable smart lock can be built from common Arduino components.

International Journal of AI Electrical Civil and Mechanical engineering
Arduino and IoT Applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon