Effects of Talar Osteochondral Lesion Location and Size on the Ankle Joint: A Finite Element Analysis With Cadaveric Validation

BackgroundOsteochondral lesions of the talus (OLTs) are frequently treated with bone marrow stimulation, but failure rates increase as lesion size enlarges. Operative decision-making is largely based on lesion diameter, with limited quantitative biomechanical evidence addressing how lesion size and anatomic location together influence ankle joint mechanics. This study evaluated how OLT size and anatomic location might affect cartilage stress distribution under physiologic loadingMethodsTwelve fresh-frozen ankle specimens underwent weight-bearing computed tomography (WBCT) under a standardized 70-kg (~686-N) axial load in the neutral position in the intact state and following sequential creation of 6-, 8-, 10-, 12-, and 15-mm osteochondral defects. Specimens were assigned to one of three clinically relevant talar zones: centromedial (zone 4), centrolateral (zone 6), or posteromedial (zone 7; n = 4 per zone). Subject- and lesion-state-specific finite element models were generated from the neutral-position WBCT data sets and subsequently analyzed computationally in 15° plantarflexion, neutral position, and 15° dorsiflexion. Maximum and average talar cartilage von Mises stresses were calculated.ResultsCartilage stress increased nonlinearly with progressive lesion enlargement. Significant stepwise increases were most consistently observed in zones 4 and 6, particularly during plantarflexion and dorsiflexion, with prominent increases across the 8- to 12-mm range. Zone 7 demonstrated more modest changes, with no significant sequential increases. Stress escalation was less pronounced in the neutral position.ConclusionProgressive OLT enlargement produced nonlinear increases in talar cartilage stress, with the magnitude and timing of stress escalation varying across lesion locations and ankle positions. Stress escalation was most pronounced in zones 4 and 6 across the 8- to 12-mm range, whereas zone 7 demonstrated more modest changes. These findings suggest that lesion location and the associated mechanical environment may provide additional biomechanical information beyond lesion size alone; however, they should not be interpreted as establishing new clinical treatment thresholds.Level of Evidence:5.

Authors

Institutions

Publication Details

Journal
Foot & Ankle Specialist
Published
2026-11-18
DOI
https://doi.org/10.1177/19386400261499819
Primary Topic
Foot and Ankle Surgery
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effects of Talar Osteochondral Lesion Location and Size on the Ankle Joint: A Finite Element Analysis With Cadaveric Validation

Lercan Aslan, Soheil Ashkani‐Esfahani, Ömer Subaşı, Gregory R. Waryasz et al.
4 links
Foot & Ankle Specialist
Foot and Ankle Surgery
article

Effects of Talar Osteochondral Lesion Location and Size on the Ankle Joint: A Finite Element Analysis With Cadaveric Validation

Lercan Aslan, Soheil Ashkani‐Esfahani, Ömer Subaşı, Gregory R. Waryasz, Gino M. M. J. Kerkhoffs, John Y. Kwon, Christopher William DiGiovanni, Colin O’Neill, Dorien Winckelmans
article en

Abstract

BackgroundOsteochondral lesions of the talus (OLTs) are frequently treated with bone marrow stimulation, but failure rates increase as lesion size enlarges. Operative decision-making is largely based on lesion diameter, with limited quantitative biomechanical evidence addressing how lesion size and anatomic location together influence ankle joint mechanics. This study evaluated how OLT size and anatomic location might affect cartilage stress distribution under physiologic loadingMethodsTwelve fresh-frozen ankle specimens underwent weight-bearing computed tomography (WBCT) under a standardized 70-kg (~686-N) axial load in the neutral position in the intact state and following sequential creation of 6-, 8-, 10-, 12-, and 15-mm osteochondral defects. Specimens were assigned to one of three clinically relevant talar zones: centromedial (zone 4), centrolateral (zone 6), or posteromedial (zone 7; n = 4 per zone). Subject- and lesion-state-specific finite element models were generated from the neutral-position WBCT data sets and subsequently analyzed computationally in 15° plantarflexion, neutral position, and 15° dorsiflexion. Maximum and average talar cartilage von Mises stresses were calculated.ResultsCartilage stress increased nonlinearly with progressive lesion enlargement. Significant stepwise increases were most consistently observed in zones 4 and 6, particularly during plantarflexion and dorsiflexion, with prominent increases across the 8- to 12-mm range. Zone 7 demonstrated more modest changes, with no significant sequential increases. Stress escalation was less pronounced in the neutral position.ConclusionProgressive OLT enlargement produced nonlinear increases in talar cartilage stress, with the magnitude and timing of stress escalation varying across lesion locations and ankle positions. Stress escalation was most pronounced in zones 4 and 6 across the 8- to 12-mm range, whereas zone 7 demonstrated more modest changes. These findings suggest that lesion location and the associated mechanical environment may provide additional biomechanical information beyond lesion size alone; however, they should not be interpreted as establishing new clinical treatment thresholds.Level of Evidence:5.

Foot & Ankle Specialist
Koç University (TR), Harvard University (US), Amsterdam Neuroscience (NL), Amsterdam University Medical Centers (NL), Health & Safety in Sports (NL), Amsterdam Movement Sciences (NL), Mass General Brigham (US)
Arthrex
Good health and well-being
Foot and Ankle Surgery
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon