Design of a pilot plant for the production of CuPc: F4TCNQ organic semiconductor thin films

The fabrication of organic semiconductors remains constrained by the lack of production systems that facilitate its transition from the laboratory to scalable manufacturing. In this regard, this work proposes an integrated methodology for the design and evaluation of a pilot plant intended to produce semiconductor thin films of copper phthalocyanine doped with 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (CuPc: F 4 -TCNQ). The methodology combines systematic layout planning (SLP), discrete-event simulation, and multivariate statistical analysis to define the production system, size the installed capacity, design the physical layout, and evaluate the operational performance. The model was implemented in Arena ® 2026 and supplemented with FlexSim ® 2027 to verify the layout’s spatial feasibility. The design encompasses a total area of 1496.5 m² and the high-vacuum thermal evaporation deposition system was identified as the primary capacity bottleneck, with a utilization rate of 94.24%. Besides, the results show an average production of 1036.50 films during the simulation horizon and an average cycle time of 156.63 min, which allows us to characterize the operational performance of the proposed configuration under the modeled conditions. The sensitivity analysis conducted with Arena ® ’s Process Analyzer revealed that increasing PVD capacity without increasing supply does not improve production nor cycle time. These results provide a technical basis for the possible implementation and scaling of the pilot plant in Ecuador, subject to further studies and experimental validation.

Authors

Institutions

Publication Details

Journal
The International Journal of Advanced Manufacturing Technology
Published
2026-11-18
DOI
https://doi.org/10.1007/s00170-026-19550-z
Primary Topic
Advanced Manufacturing and Logistics Optimization
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Design of a pilot plant for the production of CuPc: F4TCNQ organic semiconductor thin films

María Elena Sánchez Vergara, Gabriela Joseth Serrano Torres, José Ramón Álvarez Bada
The International Journal of Advanced Manufacturing Technology
Advanced Manufacturing and Logistics Optimization
article

Design of a pilot plant for the production of CuPc: F4TCNQ organic semiconductor thin films

María Elena Sánchez Vergara, Gabriela Joseth Serrano Torres, José Ramón Álvarez Bada
article en

Abstract

The fabrication of organic semiconductors remains constrained by the lack of production systems that facilitate its transition from the laboratory to scalable manufacturing. In this regard, this work proposes an integrated methodology for the design and evaluation of a pilot plant intended to produce semiconductor thin films of copper phthalocyanine doped with 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (CuPc: F 4 -TCNQ). The methodology combines systematic layout planning (SLP), discrete-event simulation, and multivariate statistical analysis to define the production system, size the installed capacity, design the physical layout, and evaluate the operational performance. The model was implemented in Arena ® 2026 and supplemented with FlexSim ® 2027 to verify the layout’s spatial feasibility. The design encompasses a total area of 1496.5 m² and the high-vacuum thermal evaporation deposition system was identified as the primary capacity bottleneck, with a utilization rate of 94.24%. Besides, the results show an average production of 1036.50 films during the simulation horizon and an average cycle time of 156.63 min, which allows us to characterize the operational performance of the proposed configuration under the modeled conditions. The sensitivity analysis conducted with Arena ® ’s Process Analyzer revealed that increasing PVD capacity without increasing supply does not improve production nor cycle time. These results provide a technical basis for the possible implementation and scaling of the pilot plant in Ecuador, subject to further studies and experimental validation.

The International Journal of Advanced Manufacturing Technology
Universidad Anáhuac (MX), Universidad Nacional de Chimborazo (EC), Universidad Tecnológica Fidel Velázquez (MX)
Industry, innovation and infrastructure
Advanced Manufacturing and Logistics Optimization
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon