Reverse Engineering and Operational Testing of a Machine Element
This paper presents an applied reverse-engineering approach for restoring a small damaged polymer component used in a pneumatic distributor. The proposed reconstruction workflow comprises an assessment of the original machine element and its functional requirements, 3D scanning, CAD-based restoration of the damaged region, dimensional evaluation, reproduction by PolyJet additive manufacturing, and verification using manual and software-based measurements. The geometry was acquired using an Artec Micro desktop 3D scanner and processed in Artec Studio 15 Professional. The mating dimensions were verified in relation to the actual machine to confirm installation suitability. The manufactured replacement components exhibited an operational durability comparable to, and in some cases greater than, that of the original part when expressed as the number of manufactured products. Failure occurred in approximately the same region for all specimens. The results confirm the applicability of the 3D scanning-CAD-additive manufacturing workflow for the rapid reconstruction and functional verification of an otherwise unavailable spare part.
Authors
- Peter Panev (ORCID: https://orcid.org/0009-0001-8950-8753)
- Miglena Paneva (ORCID: https://orcid.org/0009-0007-1559-1172)
Institutions
- Bulgarian Academy of Sciences (BG)
- Institute of Information and Communication Technologies (BG)
Publication Details
- Journal
- WSEAS TRANSACTIONS ON APPLIED AND THEORETICAL MECHANICS
- Published
- 2026-11-18
- DOI
- https://doi.org/10.37394/232011.2027.22.5
- Primary Topic
- Additive Manufacturing and 3D Printing Technologies
- Type
- article
- Field-Weighted Citation Impact
- 0.00