Technological Features of Restoration of Erosion-Worn Steam Turbine Blades
Extending the service life of steam turbine blades operating under conditions of intensive erosive wear is an urgent task of modern energy. Based on this, a technology for restoring worn blades has been developed, which includes surfacing (welding) of worn edges, mechanical and thermal treatment, and surface hardening to increase erosion wear resistance. An experimental and theoretical justification of the set of technological operations and restoration modes is given. Materials, a method and modes for surfacing (welding) of worn blade edges are selected, the role of thermal treatment in ensuring the required properties of surfacings is shown, and its optimal parameters are selected. It has been established that the highest set of mechanical characteristics in surfacings made of high-alloy steels with 12 % chromium can be achieved by tempering with high-speed (V heat > 150 °C/s) induction heating. The effectiveness of using surface hardening of surfaced edges by induction heating with ultrahigh-frequency currents (microwaves) to ensure high anti-erosion resistance of restored blades has been substantiated. It has been determined that after surfacing and double heat treatment (tempering and anti-erosion hardening by microwaves), restored blades are not inferior to the corresponding requirements for new blades in terms of the main indicators of structural strength and operational properties. The obtained research results have been confirmed by operational tests at one of the power units of the operating TPP, the developed technology is recommended for industrial use.
Authors
- Olena Mykhailivna Rebrova (ORCID: https://orcid.org/0000-0003-2315-7003)
- Alexey Vasilchenko (ORCID: https://orcid.org/0000-0002-5806-4029)
- Mariy Shyogoleva
- Oleksii Rebrov (ORCID: https://orcid.org/0000-0002-1312-9992)
- Mykola Pogribniy
Institutions
- National University of Civil Protection of Ukraine (UA)
- National Technical University "Kharkiv Polytechnic Institute" (UA)
- Kharkiv National Medical University (UA)
Publication Details
- Journal
- Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena
- Published
- 2026-11-18
- DOI
- https://doi.org/10.4028/p-2ghnvs
- Primary Topic
- Metal Alloys Wear and Properties
- Type
- article
- Field-Weighted Citation Impact
- 0.00