Prediction of single-pile bearing capacity in high-fill areas from O-cell tests using L-BFGS-B inversion

In O-cell pile load tests conducted at high-fill mine spoil-dump sites, testing is often terminated before the pile reaches its ultimate bearing state owing to the loading-capacity limitation of the O-cell and the requirement to avoid destructive loading of engineering piles, making it difficult to directly determine the ultimate vertical bearing capacity of the pile. To address this issue, a prediction method based on the limited-memory Broyden–Fletcher–Goldfarb–Shanno algorithm with box constraints (L-BFGS-B) is proposed. Based on load-transfer theory, a depth-dependent ideal elastoplastic model for shaft resistance and a bilinear hardening model for toe resistance are established. The soil-layer-specific coefficients governing the depth-dependent shaft stiffness and the corresponding pile–soil interface elastic-limit displacements, together with the pile-toe initial stiffness, hardening stiffness, and elastic-limit displacement, are back-analyzed within prescribed bounds by minimizing the mean squared displacement residual between the measured and calculated O-cell responses. The complete load–displacement responses of the upper and lower pile segments are then reconstructed and converted into an equivalent conventional pile-head load–displacement curve using the equal-displacement method, from which the ultimate bearing capacity is determined. Finally, ABAQUS numerical models of the O-cell test and conventional static load test are established for comparative analysis. The results show that the proposed method effectively reproduces the measured O-cell responses, and the back-analyzed axial-force distributions are in good overall agreement with the numerical simulation results. The predicted ultimate vertical bearing capacity of the single pile agrees well with the conventional static-loading simulation result, with a relative deviation of approximately 5.9%. The proposed method provides an efficient approach for back-analyzing load-transfer parameters from incomplete O-cell test data and predicting the bearing capacity of single piles in high-fill mine spoil-dump sites.

Authors

Institutions

Publication Details

Journal
Scientific Reports
Published
2026-11-18
DOI
https://doi.org/10.1038/s41598-026-80176-y
Primary Topic
Geotechnical Engineering and Soil Mechanics
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Prediction of single-pile bearing capacity in high-fill areas from O-cell tests using L-BFGS-B inversion

魏焕卫, Cong Liu, Yilong Xiao, Honghua Zhao et al.
Scientific Reports
Geotechnical Engineering and Soil Mechanics
article

Prediction of single-pile bearing capacity in high-fill areas from O-cell tests using L-BFGS-B inversion

魏焕卫, Cong Liu, Yilong Xiao, Honghua Zhao, Min Chen, Chunhao Zhi, Jingang Wang
article en

Abstract

In O-cell pile load tests conducted at high-fill mine spoil-dump sites, testing is often terminated before the pile reaches its ultimate bearing state owing to the loading-capacity limitation of the O-cell and the requirement to avoid destructive loading of engineering piles, making it difficult to directly determine the ultimate vertical bearing capacity of the pile. To address this issue, a prediction method based on the limited-memory Broyden–Fletcher–Goldfarb–Shanno algorithm with box constraints (L-BFGS-B) is proposed. Based on load-transfer theory, a depth-dependent ideal elastoplastic model for shaft resistance and a bilinear hardening model for toe resistance are established. The soil-layer-specific coefficients governing the depth-dependent shaft stiffness and the corresponding pile–soil interface elastic-limit displacements, together with the pile-toe initial stiffness, hardening stiffness, and elastic-limit displacement, are back-analyzed within prescribed bounds by minimizing the mean squared displacement residual between the measured and calculated O-cell responses. The complete load–displacement responses of the upper and lower pile segments are then reconstructed and converted into an equivalent conventional pile-head load–displacement curve using the equal-displacement method, from which the ultimate bearing capacity is determined. Finally, ABAQUS numerical models of the O-cell test and conventional static load test are established for comparative analysis. The results show that the proposed method effectively reproduces the measured O-cell responses, and the back-analyzed axial-force distributions are in good overall agreement with the numerical simulation results. The predicted ultimate vertical bearing capacity of the single pile agrees well with the conventional static-loading simulation result, with a relative deviation of approximately 5.9%. The proposed method provides an efficient approach for back-analyzing load-transfer parameters from incomplete O-cell test data and predicting the bearing capacity of single piles in high-fill mine spoil-dump sites.

Scientific Reports
Dalian University of Technology (CN), China Power Engineering Consulting Group (China) (CN), Shandong Electric Power Engineering Consulting Institute Corp (CN), Shandong Jianzhu University (CN)
National Natural Science Foundation of China, Natural Science Foundation of Shandong Province
Geotechnical Engineering and Soil Mechanics
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon