Additional Influence of the Frictional-Deformation Aspect of Surface Treatment on the Changes in Structure and Properties that Occur in Steels
The article considers the modern view of the influence of the deformation aspect of processing on the structural state and properties of steels from the point of view of a combination of thermal and mechanical effects that cause significant structural transformations in the surface layers of the material. The main emphasis in the study is placed on considering the influence of the frictional-deformation aspect of processing on changes in the structure and properties of steels during surface strengthening. The main mechanisms of strengthening of materials with the participation of deformation effects are considered and their characteristics are given. Using durometric studies and using the results of metallographic analysis obtained earlier, the features of the relationship between the evolution of the microstructure and the change in properties in the field of influence of surface deformation are determined. Separate results of the influence of additional frictional-deformation surface processing are presented and the influence of the deformation component on the distribution of microhardness in the cross section of steel samples with different carbon contents is analyzed. It is shown that by creating the necessary conditions for surface strengthening in steel products, even when they are already thermally strengthened to the maximum possible level, it is possible to achieve their effective additional strengthening due to the deformation effect in a certain temperature range, with the implementation of the Hall-Petch effect and subgrain-dislocation strengthening with the complex action of material processing. Based on the comparison of processing methods, it was found that the additional effect of the frictional-deformation aspect of surface processing is realized by the joint contribution of each of the specified methods. This is confirmed by such changes in the structure and properties of the study materials as crushing and fragmentation of the structure at the grain and subgrain levels, an increase in both microhardness and the level of other mechanical characteristics in the surface layer of the samples. The adaptation of various methods of frictional-deformation surface processing for different types of steel parts according to their purpose is proposed.
Authors
- Alexey Vasilchenko (ORCID: https://orcid.org/0000-0002-5806-4029)
- Оleg Volkov
- Valeria Valerievna Subbotina (ORCID: https://orcid.org/0000-0002-3882-0368)
- Oleksandr Lyubchenko
- Iryna Melnyk (ORCID: https://orcid.org/0009-0006-2291-2141)
Institutions
- National University of Civil Protection of Ukraine (UA)
- National Technical University "Kharkiv Polytechnic Institute" (UA)
- Kharkiv National Medical University (UA)
Publication Details
- Journal
- Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena
- Published
- 2026-11-18
- DOI
- https://doi.org/10.4028/p-ev0fuh
- Primary Topic
- Surface Treatment and Residual Stress
- Type
- article
- Field-Weighted Citation Impact
- 0.00