Catalytic Pyrolysis of Associated Petroleum Gas over Magnetite-Modified Pyrolytic Carbon for Carbon Nanotube Production
This work focuses on the production of hydrogen and nanostructured carbon via the catalytic pyrolysis of associated petroleum gas (APG) using magnetite-modified activated pyrolytic carbon (MMPC). Fe3O4/carbon composites with a mass ratio of 1:1 were synthesized using both in situ and ex situ methods. X-ray diffraction (XRD) analysis revealed an Fe3O4 content of 47.3–48.5 wt.% with an average crystallite size of 11.9 nm. The specific surface area of the resulting catalysts ranged from 186.9 to 258.2 m2/g, with the ex situ samples exhibiting a more developed microporous structure. The catalytic pyrolysis of APG was conducted at 750, 775, and 800 °C for 6 h. The H2 content in the products ranged from 8.60% to 11.54%, while the yield of accumulated carbon reached 2.85–7.08 g/gc. The highest carbon yield—7.08 g/gc—was obtained using the ex situ sample at 800 °C. Transmission electron microscopy (TEM) analysis showed that the carbon product consists of carbon nanotubes with an average diameter of 23.9–76.9 nm. The results indicate that the modification method has a significantly greater impact on the formation and morphology of the carbon product than it does on the H2 concentration.
Authors
- Aleksandr O. Dudoladov (ORCID: https://orcid.org/0000-0003-0978-8036)
- Mikhail S. Vlaskin (ORCID: https://orcid.org/0000-0001-6549-9939)
- Matvey S. Galtsov-Tsientsiala (ORCID: https://orcid.org/0009-0007-1208-0393)
- Ellina N. Burkova
- Yaroslava V. Mikhailova
Institutions
- Joint Institute for High Temperatures (RU)
Publication Details
- Journal
- Nanomaterials
- Published
- 2026-11-18
- DOI
- https://doi.org/10.3390/nano16221493
- Primary Topic
- Catalysts for Methane Reforming
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Ministry of Science and Higher Education of the Russian Federation