Particle size partitioning of mineralogical and morphological features during milling of haematite-goethite iron ores

Partitioning of mineralogical and morphological features in three Western Australian haematite-goethite ores during milling was investigated. Samples were milled for different time, sieved into six particle size fractions (2.0 – 4.0, 1.0 – 2.0, 0.5 – 1.0, 0.25 – 0.5, 0.1 – 0.25, and < 0.1 mm), and characterised using X-ray diffraction (XRD), optical microscopy, scanning electron microscope equipped with energy-dispersive X-ray spectroscopy (SEM-EDS), SEM-EDS-based mineral liberation analysis, and nitrogen physisorption for their mineralogical and morphological features. Results show pronounced size-dependent mineral partitioning governed by mineralogical and mechanical contrasts. Kaolinite and greenalite preferentially concentrated in the fine fractions, whereas goethite and quartz tended to remain in the coarser fractions, and haematite remained broadly distributed across all size fractions. The extent of partitioning increased with gangue content and milling time. Mineral liberation analysis confirmed rapid liberation of gangue, particularly in the fines, supporting preferential liberation and redistribution during milling. SEM-EDS observations revealed a mixed fracture regime involving both interfacial and intragranular breakage. N 2 physisorption showed that total pore volumes in the fine fractions (0.1 – 0.25 and < 0.1 mm) were approximately 2 – 15 times higher than those in the coarse fractions (2.0 – 4.0 and 1.0 – 2.0 mm), while the relative contribution of micropores to total pore volume decreased from up to 28.8% in the coarse fractions to generally below 6.8% in fines.

Authors

Institutions

Publication Details

Journal
Minerals Engineering
Published
2026-11-18
DOI
https://doi.org/10.1016/j.mineng.2026.111090
Primary Topic
Mineral Processing and Grinding
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Particle size partitioning of mineralogical and morphological features during milling of haematite-goethite iron ores

Jialiang Xu, Dongke Zhang, Zhezi Zhang, Chiemeka Onyeka Okoye et al.
2 links
Minerals Engineering
Mineral Processing and Grinding
article

Particle size partitioning of mineralogical and morphological features during milling of haematite-goethite iron ores

Jialiang Xu, Dongke Zhang, Zhezi Zhang, Chiemeka Onyeka Okoye, Kaijie Li
article en

Abstract

Partitioning of mineralogical and morphological features in three Western Australian haematite-goethite ores during milling was investigated. Samples were milled for different time, sieved into six particle size fractions (2.0 – 4.0, 1.0 – 2.0, 0.5 – 1.0, 0.25 – 0.5, 0.1 – 0.25, and < 0.1 mm), and characterised using X-ray diffraction (XRD), optical microscopy, scanning electron microscope equipped with energy-dispersive X-ray spectroscopy (SEM-EDS), SEM-EDS-based mineral liberation analysis, and nitrogen physisorption for their mineralogical and morphological features. Results show pronounced size-dependent mineral partitioning governed by mineralogical and mechanical contrasts. Kaolinite and greenalite preferentially concentrated in the fine fractions, whereas goethite and quartz tended to remain in the coarser fractions, and haematite remained broadly distributed across all size fractions. The extent of partitioning increased with gangue content and milling time. Mineral liberation analysis confirmed rapid liberation of gangue, particularly in the fines, supporting preferential liberation and redistribution during milling. SEM-EDS observations revealed a mixed fracture regime involving both interfacial and intragranular breakage. N 2 physisorption showed that total pore volumes in the fine fractions (0.1 – 0.25 and < 0.1 mm) were approximately 2 – 15 times higher than those in the coarse fractions (2.0 – 4.0 and 1.0 – 2.0 mm), while the relative contribution of micropores to total pore volume decreased from up to 28.8% in the coarse fractions to generally below 6.8% in fines.

Minerals EngineeringVol. 251
The University of Western Australia (AU)
Curtin University of Technology, China Scholarship Council, Buddhist Tzu Chi Medical Foundation
Mineral Processing and Grinding
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon