Composite-Path-Based Picosecond Laser Microhole Machining and Coherent Imaging Detection
Ultrafast laser microhole machining still lacks reliable taper control and on-machine geometric inspection. We combine a partitioned full-factorial design, composite-path optimization and spectral-domain optical coherence tomography (SD-OCT) on a single 355 nm, 10 ps platform for 80 μm holes in 200 μm silicon wafers. Range analysis and a second-order regression on uncoded physical variables, fitted to 448 parameter combinations with three replicate holes each, identified power, scanning speed and number of scans as significant at p < 0.001 but not repetition rate at p = 0.838, with R2 = 0.802. The resulting helical setting of 498 kHz, 15 W, 203 mm/s and 50 scans gave a mean taper of 0.90°. A composite path combining helical pre-drilling with trepanning was then applied with at 500 kHz, 15 W, 50 mm/s, 50 passes and a spiral diameter of 75 μm, and the mean taper decreased to 0.74° ± 0.05°, a reduction of 0.16° or 17.8% relative to the single helical path, which is reported as a reproducible trend. SD-OCT entrance and exit diameters were compared with an offline 3D optical profilometer, with metallurgical microscopy as an auxiliary reference. The deviations span −1.39° to 0.36° with a mean of −0.63° and an RMSE of 0.87°, a measure of inter-method agreement rather than OCT reading scatter. Since the residual method-to-method scatter exceeds the 0.16° reduction, the OCT data rank the hole geometries but do not resolve absolute taper at the 0.1° level. Although the absolute accuracy is limited by resolution and occlusion, the method has potential for online detection and closed-loop machining, providing a feasible approach for rapid machining and online detection of ultrafast laser microhole taper.
Authors
- Yang Liu (ORCID: https://orcid.org/0000-0002-6872-6815)
- Yu Lu
- Yuanqin Xia (ORCID: https://orcid.org/0009-0007-0040-3378)
- Rui Meng
- Ruilong Wu
- Shuze Zhang
- Meng Ren
Institutions
- Tianjin University of Technology and Education (CN)
- Hebei University of Technology (CN)
Publication Details
- Journal
- Photonics
- Published
- 2026-11-18
- DOI
- https://doi.org/10.3390/photonics13111085
- Primary Topic
- Laser Material Processing Techniques
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Tianjin University of Science and Technology