Research and design of multimodal oam beam multiplexing metasurface
In this paper, a metasurface for OAM beam multiplexing is designed. The polarization-multiplexed metasurface unit adopts a cross-ring metal structure embedded in a square ring, by changing the length of the metal arm, 360° phase coverage was achieved while maintaining a transmission amplitude above 0.8; in addition, a metasurface array consisting of 42 × 42 units with a size of 105 mm × 105 mm is constructed, where the pattern “Z” is designed for OAM beam multiplexing with mode l = +1, and the pattern “X” for mode l = −1. Both simulation and measurement results indicate that OAM beams of different modes can achieve the reconstruction of different images at preset positions after passing through the multiplexed metasurface, which is completely consistent with the intended targets. This design enriches the methods of OAM beam multiplexing and possesses considerable research value.
Authors
- Xin Yu (ORCID: https://orcid.org/0000-0003-4571-8510)
- Wei Zhang (ORCID: https://orcid.org/0000-0003-3704-6013)
- Honggang Hao (ORCID: https://orcid.org/0009-0009-7821-3069)
- Pan Tang
- Hongguo Sun
Institutions
- Chongqing University of Posts and Telecommunications (CN)
Publication Details
- Journal
- Electromagnetics
- Published
- 2026-11-18
- DOI
- https://doi.org/10.1080/02726343.2026.2755598
- Primary Topic
- Advanced Antenna and Metasurface Technologies
- Type
- article
- Field-Weighted Citation Impact
- 0.00