Frictional instability in dry quartz gouge from room to elevated temperatures
The frictional properties of fault materials exert a strong influence on fault dynamics and earthquake generation. The velocity dependence of friction, a key factor controlling slip instability, can be modified by temperature, pressure, and the presence of water. Understanding of the frictional properties of dry quartz gouge is necessary to evaluate the effect of water. To investigate the slip stability of dry quartz gouge, velocity-step shear experiments were performed using a double-direct shear apparatus at a normal stress of 10 MPa, temperatures from 30°C to 400°C, and sliding velocities from 0.36 µm/s to 39 µm/s. The steady-state friction coefficients at 3.0 µm/s ranged from 0.619 to 0.712 and showed little temperature dependence. Immediate frictional responses were observed following changes in sliding velocity, and the steady-state friction coefficients decreased with increasing velocity. The velocity-dependent frictional behavior was analyzed within the framework of rate-and-state friction (RSF) theory. The a parameter (direct effect) exhibited a weakly negative or negligible temperature dependence, whereas the b parameter (evolution effect) increased slightly with increasing temperature. As a result, the a – b values were negative at all tested temperatures and became increasingly negative with increasing temperature. These results indicate that frictional instability can occur in dry quartz gouge even in the absence of water.
Authors
- Ikuo Katayama (ORCID: https://orcid.org/0000-0002-8664-0409)
- Kenji Kawai (ORCID: https://orcid.org/0000-0003-4383-4622)
- Hiroshi Sakuma (ORCID: https://orcid.org/0000-0002-6522-0704)
- Shoya Uchikoshi
Institutions
- National Institute for Materials Science (JP)
- Kyoto University (JP)
- The University of Tokyo (JP)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-18
- DOI
- https://doi.org/10.21203/rs.3.rs-11562621/v1
- Primary Topic
- earthquake and tectonic studies
- Type
- preprint
Funders
- Japan Society for the Promotion of Science