Polylactic acid (PLA)/Polycaprolactone (PCL)/Hydroxyapatite (HA) three-dimensional porous scaffolds for bone tissue engineering

Bone tissue engineering requires three-dimensional scaffolds that mimic the extracellular matrix, support cell behavior, and degrade at an appropriate rate. This study fabricated polylactic acid/polycaprolactone/hydroxyapatite (PLA/PCL/HA) composite scaffolds via solvent casting/particle leaching and systematically investigated the effects of PLA:PCL weight ratios (0:100, 25:75, 50:50, 75:25, 100:0) and HA concentrations (1, 3, and 5 wt%) on wettability, biodegradability, bioactivity, cytocompatibility, and osteogenic potential. Results demonstrated that increasing PLA content in the PLA/PCL blend had only a modest effect on hydrophilicity, with contact angles of unfilled scaffolds remaining in the range of approximately 110–113° due to the polar ester groups of PLA. In contrast, the incorporation of HA nanoparticles markedly improved wettability through both chemical (polar hydroxyl and phosphate groups) and physical (surface roughening) mechanisms, reducing the contact angle from 112.76° (pure PCL) to 84.34° for the 75PLA/25PCL-5HA formulation. Bioactivity assessment in simulated body fluid for 28 days showed calcium phosphate layer formation on all HA-containing scaffolds. The 75PLA/25PCL-5HA and 50PLA/50PCL-5HA samples achieved Ca/P atomic ratios of 1.77 and 1.58, respectively, both of which fall within the apatite range and are close to the stoichiometric HA value of 1.67 (deviations of 0.10 and 0.09, respectively). MTT assays showed maintained MG-63 cell metabolic activity across all scaffold formulations during the 7-day culture period MTT assays showed maintained MG-63 cell metabolic activity across all scaffold formulations during the 7-day culture period. Alizarin Red staining demonstrated that HA-containing scaffolds significantly promoted calcium deposition compared to HA-free samples, with the 75PLA/25PCL-5HA sample exhibiting the highest mineralization capacity. These findings establish that PLA/PCL/HA composite scaffolds fabricated by solvent casting/particle leaching, particularly the 75PLA/25PCL-5HA formulation, represent promising candidates for bone tissue regeneration applications.

Authors

Institutions

Publication Details

Journal
Scientific Reports
Published
2026-11-18
DOI
https://doi.org/10.1038/s41598-026-79008-w
Primary Topic
Bone Tissue Engineering Materials
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Polylactic acid (PLA)/Polycaprolactone (PCL)/Hydroxyapatite (HA) three-dimensional porous scaffolds for bone tissue engineering

Zahra Sherafat, Seyed Mojtaba Zebarjad, M. Nazari, M. Sani et al.
1 links
Scientific Reports
Bone Tissue Engineering Materials
article

Polylactic acid (PLA)/Polycaprolactone (PCL)/Hydroxyapatite (HA) three-dimensional porous scaffolds for bone tissue engineering

Zahra Sherafat, Seyed Mojtaba Zebarjad, M. Nazari, M. Sani, K. Falamarzi
article en

Abstract

Bone tissue engineering requires three-dimensional scaffolds that mimic the extracellular matrix, support cell behavior, and degrade at an appropriate rate. This study fabricated polylactic acid/polycaprolactone/hydroxyapatite (PLA/PCL/HA) composite scaffolds via solvent casting/particle leaching and systematically investigated the effects of PLA:PCL weight ratios (0:100, 25:75, 50:50, 75:25, 100:0) and HA concentrations (1, 3, and 5 wt%) on wettability, biodegradability, bioactivity, cytocompatibility, and osteogenic potential. Results demonstrated that increasing PLA content in the PLA/PCL blend had only a modest effect on hydrophilicity, with contact angles of unfilled scaffolds remaining in the range of approximately 110–113° due to the polar ester groups of PLA. In contrast, the incorporation of HA nanoparticles markedly improved wettability through both chemical (polar hydroxyl and phosphate groups) and physical (surface roughening) mechanisms, reducing the contact angle from 112.76° (pure PCL) to 84.34° for the 75PLA/25PCL-5HA formulation. Bioactivity assessment in simulated body fluid for 28 days showed calcium phosphate layer formation on all HA-containing scaffolds. The 75PLA/25PCL-5HA and 50PLA/50PCL-5HA samples achieved Ca/P atomic ratios of 1.77 and 1.58, respectively, both of which fall within the apatite range and are close to the stoichiometric HA value of 1.67 (deviations of 0.10 and 0.09, respectively). MTT assays showed maintained MG-63 cell metabolic activity across all scaffold formulations during the 7-day culture period MTT assays showed maintained MG-63 cell metabolic activity across all scaffold formulations during the 7-day culture period. Alizarin Red staining demonstrated that HA-containing scaffolds significantly promoted calcium deposition compared to HA-free samples, with the 75PLA/25PCL-5HA sample exhibiting the highest mineralization capacity. These findings establish that PLA/PCL/HA composite scaffolds fabricated by solvent casting/particle leaching, particularly the 75PLA/25PCL-5HA formulation, represent promising candidates for bone tissue regeneration applications.

Scientific Reports
Shiraz University (IR), Shiraz University of Medical Sciences (IR)
Good health and well-being
Bone Tissue Engineering Materials
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon