Decoupling strength from refractory attack through Taguchi-guided processing using silica lining in coreless induction melting of Hadfield manganese steel
Silica linings are the cheapest option for coreless induction furnaces but degrade rapidly when Hadfield manganese steel is melted. In the 500 kg furnace studied, a lining that lasts 140–190 heats of cast iron survives only 30–40 heats of manganese steel. The study investigated whether tensile strength and lining attack are governed by different processing variables. A 3 3 full-factorial experimental program (melt temperature 1400–1600°C, holding time 30–60 min, charge Mn 12–14 wt.%, 27 conditions, 81 heats on one lining) was analyzed by a Taguchi L9 array, S/N ratios, ANOVA, and grey relational analysis, with slag SiO 2 and MnO as indices of lining attack. Manganese content explained 94% of the variation in ultimate tensile strength (UTS), and temperature explained less than 0.1%, whereas temperature explained 80% of the variation in slag SiO 2 and 61% of that in slag MnO. Melting at 1600°C instead of ≤ 1500°C doubled the silica taken up by the slag (19.6 to 40.5 wt.%) with no gain in strength. From nine runs, the Taguchi analysis predicted an optimum of 30 min, 1500°C and 12 wt.% Mn (1028 MPa), confirmed by three dedicated heats (1029.9 ± 1.5 MPa) and by the factorial run at this condition (1017 MPa), which also ranked first in the multi-response analysis. Under controlled temperature, timed holding, and frequent deslagging, the lining remained in service for all 81 heats of the study, compared with 30–40 heats recorded for earlier linings in the same furnace. Within the conditions studied, strength was set mainly by the charge and lining attack mainly by the thermal schedule, which offers silica-lined foundries a low-cost means of extending lining life.
Authors
- Richard J. Katemi (ORCID: https://orcid.org/0000-0001-6126-8252)
- Ngesa Ezekiel Mushi (ORCID: https://orcid.org/0000-0002-1848-6120)
- Lutufyo D. Mwakalukwa
Institutions
- University of Dar es Salaam (TZ)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-18
- DOI
- https://doi.org/10.21203/rs.3.rs-11354135/v1
- Primary Topic
- Metallurgical Processes and Thermodynamics
- Type
- preprint